[1] Spencer, D. J. “Knitting Technology: A Comprehensive Handbook and Practical Guide.” Vol.16: CRC Press, 2001.
[2] Iyer, C., B. W. Mammel, Schäch, and C. Iyer “Circular Knitting: Technology, Process, Structures, Yarns, Quality.” Meisenbach, 1995.
[3] Knapton, J. and T.-Y. Lau, "19 The design and dynamics of non-linear cams for use in high-speed weft-knitting machines part i: the theoretical dynamics of non-linear cams."Journal of the Textile Institute, Vol.69, 1978, pp. 161-168.
[4] Wray, G., and N. Burns,“21-Dynamic forces in weft-knitting part ii: the effects of the cam-cylinder clearance and the presence of yarn on cam forces." Journal of the Textile Institute, Vol.67, 1976, pp. 156-161.
[5] Rule, W. K., and S. Jones, "A revised form for the Johnson–Cook strength model." International Journal of Impact Engineering, Vol.21, 1998, pp. 609-624.
[6] Jutras, M. "Improvement of the Characterisation Method of the Johnson-Cook Model." Citeseer, 2008.
[7] Wray, G. and N. Burns, "20—Dynamic forces in weft-knitting: part I: a comparison of measured non-knitting cam forces with mathematically predicted values." Journal of the Textile Institute, Vol.67, 1976, pp. 149-155.
[8] Wray, G. and N. Burns, "38—Cam-to-Needle impact forces in weft-knitting part xi: the measurement of impact-induced strains in latch needles." Journal of the Textile Institute, Vol.69, 1978, pp. 315-320.
)