@article { author = {Moulavi, Ali and Hassanzadeh, Alireza and Panahi, Amir}, title = {Acoustic-Electric Converter with Ear-Patterned Collector}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {11-17}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {Today, due to limited access to some places or unfavorable weather conditions, power transmission from the power plant and storage in the battery is very expensive. This has led researchers to find a way to solve this problem, so the use of environmental energy such as noise, motion (or displacement), light, wind, etc. has opened a new chapter for engineers. In this paper, a piezoelectric plate is designed and simulated by modeling a human eardrum. This plate is one of the components of the acoustic-electric converter, which is able to collect the noise of crowded and busy environments and convert them into electrical energy. By recording and analyzing audio signals from two highly polluted locations in MATLAB software, the two frequencies at which the highest sound weight occurred were considered as the intensification frequency. Then, using the software of the COMSOL and the obtained data, the natural frequency of the first mode shape of the converter geometry is equal to the frequency of the amplified sound. The most optimal diameter of the piezoelectric plate was 8 cm and the energy was equal to 10.5 microwatts per second and the voltage changes were 12 volts. In order to store and use the obtained voltage, a circuit is provided for this purpose.}, keywords = {noise pollution,acoustic-electric converter,Piezoelectric,green energy}, title_fa = {مبدل آکوستیک – الکتریک با جمع‌کننده الگوبرداری شده از گوش}, abstract_fa = {امروزه به دلیل دسترسی محدود به بعضی نقاط و یا شرایط نامساعد آب و هوایی انتقال توان از نیروگاه و ذخیره‌سازی در باطری بسیار پرهزینه است. این امر باعث شده تا محققان راهی برای حل این مشکل پیدا کنند، بنابراین استفاده از انرژی محیطی[i] از جمله نوفه، حرکت (یا جابه‌جایی)، نور، باد، و غیره توانسته باب جدیدی به روی مهندسان باز کند. در این مقاله یک صفحه پیزوالکتریک با الگوبرداری از پرده گوش انسان طراحی و شبیه‌سازی شده است. این صفحه یکی از اجزا مبدل آکوستیک-الکتریک است که قادر به جمع‌آوری نوفه محیط‌های شلوغ و پر تردد و تبدیل آنها به انرژی الکتریکی است. با ضبط و تحلیل سیگنال‌های صوتی دو مکان با آلودگی بالا در نرم‌افزار متلب[ii]، دو فرکانس که بیشترین وزن صدا در آنها رخ داده بود، به عنوان فرکانس تشدید درنظر گرفته شد. سپس با استفاده از نرم‌افزار کامسول[iii] و داده‌های به‌دست آمده، فرکانس طبیعی مد اول هندسه مبدل، برابر با فرکانس تشدید صوت قرار داده شده است. قطر بهینه صفحه پیزوالکتریک 8 سانتی‌متر انتخاب شد و انرژی معادل با 5/10 میکرووات بر ثانیه و تغییرات ولتاژی برابر 12 ولت به‌دست آمد. جهت ذخیره‌ و استفاده از ولتاژ به‌دست آمده، مداری به همین منظور ارائه شده است. [i]. Energy Harvesting [ii]. MATLAB [iii]. COMSOL}, keywords_fa = {آلودگی صوتی,مبدل آکوستیک - الکتریک,پیزوالکتریک,انرژی سبز}, url = {https://jvs.isav.ir/article_44975.html}, eprint = {https://jvs.isav.ir/article_44975_80156e0bc30c9310f31027e50862c7de.pdf} }