ORIGINAL_ARTICLE
بررسی اثر تغییر نیم موجهای محیطی بر فرکانسهای طبیعی پوستههای استوانهای در ارتعاشات زیر آب بهصورت تجربی و عددی
در پژوهش حاضر، اثر تغییر نیم موجهای محیطی بر فرکانسهای طبیعی پوستههای استوانهای بهصورت تجربی و عددی بررسی شده است. سه پوسته استوانهای با نسبت قطر به طول متفاوت مورد بررسی قرار گرفتند. حالتهای مختلف تماس با آب هم با روش شبیهسازی عددی و هم آزمونهای تجربی مورد مقایسه واقع شدند. اثرات عمق غوطهوری، نسبت قطر به طول، روند تغییرات فرکانس طبیعی در نیم موجهای محیطی مختلف مورد ارزیابی قرار گرفت. بررسیها نشان داد که کاهش فرکانسهای طبیعی پوسته استوانهای برای نیم موجهای محیطی مربوط به فرکانس کمینه، اندک و برای قبل و بعد این نیم موج محیطی، بیشتر است و در آغاز غوطهوری و در غوطهوری کامل، کاهش فرکانسی بهصورت ناگهانی است. همچنین با کاهش نسبت قطر به طول پوسته، فرکانسهای مربوط به نیم موجهای محیطی پایین کاهش یافته و کمترین مقدار فرکانس طبیعی به سمت نیم موجهای محیطی کمتر متمایل میشود. در نیم موجهای محیطی پایین، فرکانسهای طبیعی، اختلاف قابلتوجهی دارند و با افزایش شماره n، این اختلاف کاهش یافته و به یکدیگر همگرا میشوند.
https://jvs.isav.ir/article_242885_ebd1e7b948aaf574bf8672d33f649c39.pdf
2021-02-19
3
18
نیم موج های محیطی
تعامل سازه و سیال
ارتعاشات زیرآب
فرکانس طبیعی
شکل مود
محمد رضا
نجفی
najafi.m@ihu.ac.ir
1
گروه مهندسی مکانیک، دانشکده فنی و مهندسی، دانشگاه جامع امام حسین (ع)، تهران، ایران
AUTHOR
سعید
محجوب مقدس
smahjoubmoghadas@ihu.ac.ir
2
گروه مهندسی مکانیک، دانشگاه جامع امام حسین (ع)
LEAD_AUTHOR
سید محمد
مرتضوی
a.motalebi.f@gmail.com
3
دانشکده فنی و مهندسی، دانشگاه جامع امام حسین(علیه السلام)، تهران، ایران،
AUTHOR
محمود
سالاری
m.salari@gmail.com
4
دانشکده فنی و مهندسی، دانشگاه جامع امام حسین(علیه السلام)، تهران، ایران
AUTHOR
Rao, Singiresu S., “Vibration of continuous systems”, Vol.464, New York, Wiley, 2007.
1
[2] Senjanović, Ivo, Marko Tomić, Nikola Vladimir, and Neven Hadžić, "An analytical solution to free rectangular plate natural vibrations by beam modes–ordinary and missing plate modes", Transactions of FAMENA, 2016, Vol.40, no.3, pp.1-18.
2
[3] Blevins, Robert D., “Formulas for dynamics, acoustics and vibration”, John Wiley & Sons, 2015.
3
[4] Frymoyer, Edward Morris, “Vibration and Wave Propagation in Cylindrical Shells”, Pennsylvania State Univ University Park Ordnance Research Lab, 1967.
4
[5] Alujević, Neven, Nuria Campillo-Davo, Peter Kindt, Wim Desmet, Bert Pluymers, and Stijn Vercammen, "Analytical solution for free vibrations of rotating cylindrical shells having free boundary conditions", Engineering structures, 2017, Vol.132, pp.152-171.
5
[6] Clary, R. R., and J. D. Watkins, "Vibrational characteristics of some thin-walled cylindrical and conical frustum shells", 1965.
6
[7] Palacios Gomez, Oscar F., "Vibrations of preloaded cylindrical shells", PhD diss.University of Leicester, 1970.
7
[8] Ugural, Ansel, “Stresses in plates and shells”, McGraw-Hill, 1999.
8
[9] Soedel, Werner, and Mohamad S. Qatu, "Vibrations of shells and plates", 2005, pp.1683-1683.
9
[10] Goncalves, P. B., and R. C. Batista, "Frequency response of cylindrical shells partially submerged or filled with liquid", Journal of Sound and Vibration, 1987, Vol.113, no.1, pp.59-70.
10
[11] Senjanović, Ivo, Marko Tomić, Nikola Vladimir, and Neven Hadžić, "An analytical solution to free rectangular plate natural vibrations by beam modes–ordinary and missing plate modes", Transactions of FAMENA, 2016, Vol.40, no.3, pp.1-18.
11
[12] Missaoui, J., Li Cheng, and M. J. Richard, "Free and forced vibration of a cylindrical shell with a floor partition", Journal of Sound and Vibration, 1996, Vol.190, no.1, pp.21-40.
12
[13] Lakis, A. A., and S. Neagu, "Free surface effects on the dynamics of cylindrical shells partially filled with liquid", Journal of Sound and Vibration, 1997, Vol.207, no.2, pp.175-205.
13
[14] Jeong, Kyeong-Hoon, and Kwi-Ja Kim, "Free vibration of a circular cylindrical shell filled with bounded compressible fluid", Journal of Sound and Vibration, 1998, Vol.217, no.2, pp.197-221.
14
[15] Ergin, A., and P. Temarel, "Free vibration of a partially liquid-filled and submerged, horizontal cylindrical shell," Journal of Sound and vibration, 2002, Vol.254, no.5, pp.951-965.
15
[16] Zhang, G. J., T. Y. Li, X. Zhu, J. Yang, and Y. Y. Miao, "Free and forced vibration characteristics of submerged finite elliptic cylindrical shell", Ocean Engineering, 2017, Vol.129, pp.92-106.
16
[17] Askari, Ehsan, and Kyeong-Hoon Jeong, "Hydroelastic vibration of a cantilever cylindrical shell partially submerged in a liquid", Ocean Engineering, 2010, Vol.37, no.11-12, pp.1027-1035.
17
[18] Paak, M., M. P. Paidoussis, and A. K. Misra, "Nonlinear vibrations of cantilevered circular cylindrical shells in contact with quiescent fluid", Journal of Fluids and Structures, 2014, Vol.49, pp.283-302.
18
[19] Naumova, Natalia, Denis Ivanov, Tatiana Voloshinova, and Boris Ershov, "Mathematical modelling of cylindrical shell vibrations under internal pressure of fluid flow", In 2015 International Conference on Mechanics-Seventh Polyakhov's Reading, pp.1-3, IEEE, 2015.
19
[20] Bochkarev, S. A., S. V. Lekomtsev, and V. P. Matveenko, "Natural vibrations of loaded noncircular cylindrical shells containing a quiescent fluid", Thin-Walled Structures, 2015, Vol.90, pp.12-22.
20
[21] Rahmanian, M., R. D. Firouz-Abadi, and E. Cigeroglu, "Dynamics and stability of conical/cylindrical shells conveying subsonic compressible fluid flows with general boundary conditions", International Journal of Mechanical Sciences, 2017, Vol.120, pp.42-61.
21
[22] Guo, Wenjie, Tianyun Li, Xiang Zhu, Yuyue Miao, and Guanjun Zhang, "Vibration and acoustic radiation of a finite cylindrical shell submerged at finite depth from the free surface", Journal of sound and vibration, 2017, Vol.393, pp.338-352.
22
[23] Wang, Peng, Tianyun Li, and Xiang Zhu, "Free flexural vibration of a cylindrical shell horizontally immersed in shallow water using the wave propagation approach", Ocean Engineering, 2017, Vol.142, pp.280-291.
23
[24] Guo, Wenjie, Tianyun Li, Xiang Zhu, and Yuyue Miao, "Sound-structure interaction analysis of an infinite-long cylindrical shell submerged in a quarter water domain and subject to a line-distributed harmonic excitation", Journal of Sound and Vibration, 2018, Vol.422, pp.48-61.
24
[25] Shariati, Seyed Khalil, and Saeed Mahjob Mogadas, "Vibration analysis of submerged submarine pressure hull", Journal of vibration and acoustics, 2011, Vol.133, no.1.
25
[26] Zienkiewicz, O. C., "Coupled vibrations of a structure submerged in a compressible fluid", In Proc. of Symposium on Finite Element Techniques Held at the University of Stuttgart, 1969.
26
[27] Zienkiewicz, O. C., and R. L. Taylor, "The finite element method, Butterworth Heinemann", 2000.
27
[28] Paidoussis, Michael P., “Fluid-structure interactions: slender structures and axial flow”, Vol.1, Academic press, 1998.
28
[29] شریعتی، خ.،" تحلیل ارتعاشات آزاد پوستههای استوانهای تقویت شده مغروق با استفاده از نرمافزار انسیس"، 1385، پایان نامه کارشناسی ارشد، دانشگاه جامع امام حسین (علیه السلام).
29
ORIGINAL_ARTICLE
بررسی تحلیلی و عددی اثر اختلاف فشار و تغییر شاخص رفتار در میراگرهای مغناطیسی
در این مقاله به بررسی رفتار سیال مگنتورئولوژیکال[i] (MR) میراگرهای مغناطیسی[ii] با تأکید براثر اختلاف فشار و تغییر شاخص رفتار جریان (n) پرداخته شده است. ابتدا به روش تحلیلی و با استفاده از مدل هرشل باکلی و تقریب صفحات موازی، معادلات حاکم بر رفتار رئولوژیکی سیال MR استخراج و از مدل پلاستیک بینگهام در n=1 برای تنش برشی استفاده شد. در ادامه با مدلسازی عددی مسئله بهصورت سیال گذرا بین دو استوانه هممرکز و اعتبارسنجی آن، پارامترهای سرعت متوسط خروجی، اصطکاک سطح داخلی دیواره و لزجت[iii] ظاهری در اختلاف فشارهای ثابت و متغیر مورد بررسی قرار گرفت. نتایج نشان داد که با افزایش عدد شاخص جریان (n) در اختلاف فشار ثابت، سرعت خروجی کاهش مییابد و افزایش اختلاف فشار منجر به افزایش سرعت در نقاط مختلف قسمت خروجی میگردد. همچنین ضریب اصطکاک دیواره در اختلاف فشار ثابت با افزایش n در تمام نواحی افزایش مییابد و با افزایش اختلاف فشار، مقدار ضریب اصطکاک نیز افزایش مییابد. بررسی لزجت با تغییر n در اختلاف فشار ثابت و همچنین تغییر آن با تغییر اختلاف فشار نشاندهنده رفتار کاهشی است.
[i]. Magneto-Rheological
[ii]. Magnetic Damper
[iii]. Viscosity
https://jvs.isav.ir/article_242635_1fd11c8319f55facfd69ab251c70c874.pdf
2021-02-19
19
35
سیال مگنتورئولوژیکال
اختلاف فشار
دمپر مغناطیسی
سرعت متوسط خروجی
شاخص رفتار جریان
محمد رضا
الهامی
melhami@ihu.ac.ir
1
دانشگاه جامع امام حسین (ع)
LEAD_AUTHOR
محمدرضا
نجفی
najafi.m@ihu.ac.ir
2
گروه مهندسی مکانیک، دانشکده فنی و مهندسی، دانشگاه جامع امام حسین (ع)، تهران، ایران
AUTHOR
[1] Alavi, M.A., Sobhnamayan, F., “Analysis, Application and Stating Governing Equations of Smart Fluids”, 19th Annual Conference on Mechanical Engineering-ISME2011, 10-12 May, The University of Birjand, Birjand, Iran, 2011.
1
[2] Frank, M., "White," Fluid Mechanics", McGraw Hill., 8th ed., 2015.
2
[3] Bird, R. Byron., Warren e.,"Stewart, Edwin N. Lightfoot, Transport Phenomen”, John Wiley & son, New York, 1960.
3
[4] Chhabra, Raj P., and John Francis Richardson, “Non-Newtonian flow in the process industries: fundamentals and engineering applications”, Butterworth-Heinemann, 1999.
4
[5] Malkin, Alexander, and Alexander Y. Malkin, “Rheology fundamentals”, ChemTec publishing, 1994.
5
[6] Baranwal, Deepak, and T. S. Deshmukh. "MR-fluid technology and its application-a review", International Journal of Emerging Technology and Advanced Engineering, 2012, Vol.2, no.12, pp.563-569.
6
[7] Ahmadian, Mehdi, and James A. Norris, "Experimental analysis of magnetorheological dampers when subjected to impact and shock loading", Communications in Nonlinear Science and Numerical Simulation, 2008, Vol.13, no.9, pp.1978-1985.
7
[8] Mikułowski, G., "Adaptive impact absorbers based on magnetorheological fluids", IPPT PAN, 2008.
8
[9] Zhang, Xianzhou, Weihua Li, and X. L. Gong, "Study on magnetorheological shear thickening fluid", Smart materials and structures, 2008, Vol.17, no.1, p.015051.
9
[10] Bossis, Georges, A. Ciffreo, Yann Grasselli, and Olga Volkova, "Discontinuous shear thickening in magnetorheological suspensions", In 27th Nordic Rheology Conference" Rheology for a better world", 2018, Vol.26, pp87-91.
10
[11] Peng, Gangrou, "Novel shear thickening and magnetorheological materials and their application in controllable electrolytes." 2016.
11
[12] Bossis, G., Y. Grasselli, A. Meunier, and O. Volkova, "Tunable discontinuous shear thickening with MR suspensions", In 15th International Conference on Electrorheological fluids and Magnetorheological suspensions, 2016.
12
[13] Lindler, Jason E., Glen A. Dimock, and Norman M. Wereley, "Design of a magnetorheological automotive shock absorber", In Smart Structures and Materials 2000: Smart Structures and Integrated Systems, 2000, Vol.3985, pp.426-437. International Society for Optics and Photonics.
13
[14] Liu, Xin-yun, Da-lin Wu, and Jian Hou, "Design and analysis of a scheme for the naval gun test shell entering the bore", Defence Technology, 2020.
14
[15] Poynor, James Conner, "Innovative designs for magneto-rheological dampers", PhD diss., Virginia Tech, 2001.
15
[16] Calarasu, D., C. Cotae, and R. Olaru, "Magnetic fluid brake", Journal of Magnetism and Magnetic Materials, 1999, Vol.201, no.1-3, pp.401-403.
16
[17] Karakoc, Kerem, Edward J. Park, and Afzal Suleman, "Design considerations for an automotive magnetorheological brake", Mechatronics, 2008, Vol.18, no.8, pp.434-447.
17
[18] Huang, Jin, J. Q. Zhang, Yan Yang, and Y. Q. Wei, "Analysis and design of a cylindrical magneto-rheological fluid brake", Journal of Materials Processing Technology, 2002, Vol.129, no.1-3, pp.559-562.
18
[19] Bucchi, Francesco, Paola Forte, Francesco Frendo, and R. Squarcini, "A magnetorheological clutch for efficient automotive auxiliary device actuation", Frattura Ed Integrità Strutturale, 2013, Vol.7, no.23, pp.62-74.
19
[20] Wessling, Lisa, "Physical modeling of a clutch for heavy vehicles", 2011.
20
[21] B. Kavlicoglu, F. Gordaninejad, Y. Liu, X. Wang, and N. Cobanoglu, “Magneto rheological Fluid Limited Slip Differential Clutch”, Composite and Intelligent Materials Laboratory, Nevada, 2006.
21
[22] Giuclea, M., Sireteanu, T., Stancioiu, D. and Stammers, C.W., “Modelling of magnetorheological damper dynamic behaviour by genetic algorithms based inverse method”. Proc. R. Acad. Series A, 2004, Vol.5, no.1, p.5563.
22
[23] Spencer Jr, BrnF, S. J. Dyke, M. K. Sain, and JDf Carlson, "Phenomenological model for magnetorheological dampers", Journal of engineering mechanics, 1997, Vol.123, no.3, pp. 230-238.
23
[24] Guðmundsson, Ketill Heiðar, "Design of a magnetorheological fluid for an MR prosthetic knee actuator with an optimal geometry", 2011.
24
[25] Carlson, J. David, Wilfried Matthis, and James R. Toscano, "Smart prosthetics based on magnetorheological fluids", In Smart structures and materials 2001: industrial and commercial applications of smart structures technologies, 2001, Vol.4332, pp. 308-316., International Society for Optics and Photonics.
25
[26] Kim, Do Kyung, Maria Mikhaylova, Fu Hua Wang, Jan Kehr, Börje Bjelke, Yu Zhang, Thomas Tsakalakos, and Mamoun Muhammed, "Starch-coated superparamagnetic nanoparticles as MR contrast agents", Chemistry of Materials, 2003, Vol.15, no.23, pp.4343-4351.
26
[27] Hong, R. Y., B. Feng, L. L. Chen, G. H. Liu, H. Z. Li, Y. Zheng, and D. G. Wei, "Synthesis, characterization and MRI application of dextran-coated Fe3O4 magnetic nanoparticles", Biochemical Engineering Journal, 2008, Vol.42, no.3, pp.290-300.
27
[28] Chertok, Beata, Bradford A. Moffat, Allan E. David, Faquan Yu, Christian Bergemann, Brian D. Ross, and Victor C. Yang, "Iron oxide nanoparticles as a drug delivery vehicle for MRI monitored magnetic targeting of brain tumors", Biomaterials, Vol.29, no.4, pp.487-496.
28
[29] Hiergeist, R., W. Andrä, N. Buske, R. Hergt, I. Hilger, U. Richter, and W. Kaiser, "Application of magnetite ferrofluids for hyperthermia", Journal of magnetism and Magnetic Materials, 1999, Vol.201, no.1-3, pp.420-422.
29
[30] Ban, Shuai, and Vladislav Korenivski, "Pattern storage and recognition using ferrofluids", Journal of applied physics, 2006, Vol.99, no.8, p.08R907.
30
[31] Vander Wal, Randall L., and Thomas M. Ticich, "Comparative flame and furnace synthesis of single-walled carbon nanotubes", Chemical Physics Letters, 2001, Vol.336, no.1-2, pp.24-32.
31
[32] Raj, Kuldip, B. Moskowitz, and R. Casciari, "Advances in ferrofluid technology", Journal of magnetism and magnetic materials, 1995, Vol.149, no.1-2, pp.174-180.
32
[33] Yang, Gary, B. F. Spencer Jr, J. D. Carlson, and M. K. Sain, "Large-scale MR fluid dampers: modeling and dynamic performance considerations", Engineering structures, 2002, Vol.24, no.3, pp.309-323.
33
[34] Kim, Jeong-Hoon, Chong-Won Lee, Byung-Bo Jung, Youngjin Park, and Guangzhong Cao, "Design of magneto-rheological fluid based device", KSME international journal, 2001, Vol.15, no.11, pp.1517-1523.
34
[35] Jolly, Mark R., Jonathan W. Bender, and J. David Carlson, "Properties and applications of commercial magnetorheological fluids", Journal of intelligent material systems and structures, 1999, Vol.10, no.1, pp.5-13.
35
[36] Stephen, Papell Solomon, "Low viscosity magnetic fluid obtained by the colloidal suspension of magnetic particles." U.S. Patent 3,215,572, issued November 2, 1965.
36
[37] Phillips, Robert William, "Engineering applications of fluids with a variable yield stress", PhD diss., University of California, Berkeley, 1969.
37
[38] Wang, J. Y., Y. Q. Ni, J. M. Ko, and B. F. Spencer Jr., "Magneto-rheological tuned liquid column dampers (MR-TLCDs) for vibration mitigation of tall buildings: modelling and analysis of open-loop control", Computers & structures, 2005, Vol.83, no.25-26 pp.2023-2034.
38
[39] Wang, Xiaojie, and Faramarz Gordaninejad, "Field-controllable electro-and magneto-rheological fluid dampers in flow mode using Herschel-Bulkley theory", In Smart Structures and Materials 2000: Damping and Isolation, 2000, Vol.3989, pp.232-243. International Society for Optics and Photonics.
39
[40] Chooi, Weng W., and S. Olutunde Oyadiji, "Design, modelling and testing of magnetorheological (MR) dampers using analytical flow solutions", Computers & structures, 2008, Vol.86, no.3-5, pp.473-482.
40
[41] Awrejcewicz, Jan, and Larisa P. Dzyubak, "Hysteresis simulation and investigation of the control parameter planes", In Proc. Fifth EUROMECH Nonlinear Dynamics Conference, 2005.
41
[42] Ji, Han-Rok, Yeong-Jong Moon, Chun-Ho Kim, and In-Won Lee, "Structural vibration control using semiactive tuned mass damper", In The Eighteenth KKCNN Symposium on Civil Engineering-KAIST6, 2005, pp.18-20.
42
[43] Kwok, N. M., Q. P. Ha, J. Li, B. Samali, and S. M. Hong, "Parameter identification for a magnetorheological fluid damper: an evolutionary computation approach", In Proc. Sixth Intl. Conf. on Intelligent Technologies, 2005, pp. 115-122.
43
[44] Dyke SJ, Spencer Jr, BF, Sain MK, Carlson JD, “On the efficacy of magnetorheological dampers for seismic response reduction”, In: Proceedings of the ASME 16th Biennial Conference on Mechanical Vibration and Noise, Paper No. DETC97VIB3828, 1997, 10 p.
44
[45] Spencer Jr, BrnF, S. J. Dyke, M. K. Sain, and JDf Carlson, "Phenomenological model for magnetorheological dampers", Journal of engineering mechanics, 1997, Vol.123, no.3, pp.230-238.
45
[46] Dyke, S. J., B. F. Spencer Jr, M. K. Sain, and J. D. Carlson, "Modeling and control of magnetorheological dampers for seismic response reduction", Smart materials and structures, 1996, Vol.5, no.5, p.565.
46
[47] Parlak, Zekeriya, Tahsin Engin, and İsmail Çallı, "Optimal design of MR damper via finite element analyses of fluid dynamic and magnetic field", Mechatronics, 2012, Vol.22, no.6, pp.890-903.
47
[48] Kamath, Gopalakrishna M., Melanie K. Hurt, and Norman M. Wereley, "Analysis and testing of Bingham plastic behavior in semi-active electrorheological fluid dampers", Smart Materials and Structures, 1996, Vol.5, no.5 p.576.
48
[49] Yoo, Jin-Hyeong, and Norman M. Wereley, "Quasi-steady axisymmetric Bingham-plastic model of magnetorheological flow damper behavior", In ASME International Mechanical Engineering Congress and Exposition, 2005, Vol.4210, pp.375-380.
49
[50] Yoo, Jin-Hyeong, and Norman M. Wereley, "Nondimensional analysis of annular duct flow in magnetorheological/electrorheological dampers", International Journal of Modern Physics B, 2005,Vol.19, no.07n09, pp.1577-1583.
50
[51] Wang, D. H., H. X. Ai, and W. H. Liao, "A magnetorheological valve with both annular and radial fluid flow resistance gaps," Smart materials and structures, 2009, Vol.18, no.11, p.115001.
51
[52] Hong, S. R., S. B. Choi, Y. T. Choi, and N. M. Wereley, "Non-dimensional analysis and design of a magnetorheological damper", Journal of Sound and Vibration, 2005, Vol.288, no.4-5, pp.847-863.
52
[53] Hong, S. R., N. M. Wereley, Y. T. Choi, and S. B. Choi, "Analytical and experimental validation of a nondimensional Bingham model for mixed-mode magnetorheological dampers", Journal of Sound and Vibration, 2008, Vol.312, no.3, pp.399-417.
53
[54] Zolfagharian, Mohammad Mehdi, Mohammad Hassan Kayhani, and Mahmood Norouzi, "Manufacturing and testing of an optimized Magneto-Rheological (MR) fluid and modelling of a Twin tube MR damper using a modified non-Newtonian model using analytical quasi-static, analytical unsteady, numerical and experimental methods", Amirkabir Journal of Mechanical Engineering, 2019.
54
[55] Zolfagharian, Mohammad Mehdi, Mohammad Hassan Kayhani, Mahmood Norouzi, and Amir Jalali, "Parametric investigation of twin tube magnetorheological dampers using a new unsteady theoretical analysis", Journal of Intelligent Material Systems and Structures, 2019, Vol.30, no.6, pp.878-895.
55
[56] Ahamed, Raju, Md Meftahul Ferdaus, and Yancheng Li, "Advancement in energy harvesting magneto-rheological fluid damper: A review", Korea-Australia Rheology Journal, 2016, Vol.28, no.4, pp.355-379.
56
[57] Wereley, Norman M., and Li Pang, "Nondimensional analysis of semi-active electrorheological and magnetorheological dampers using approximate parallel plate models", smart materials and structures, 1998, Vol.7, no.5, p.732.
57
[58] Wahid, S. A., I. Ismail, S. Aid, and M. S. A. Rahim, "Magneto-rheological defects and failures: A review", In IOP Conference Series: Materials Science and Engineering, 2016, Vol.114, no.1, p.012101, IOP Publishing, 2016.
58
[59] Batchelor, George K., "An Introduction to Fluid Dynamics", Cambridge,1967, UP xviii 615.
59
[60] Tanner, R. I., "Engineering Rheology”, Clarendon Press, Oxford, 1988.
60
[61] Çeşmeci, Şevki, and Tahsin Engin., "Modeling and testing of a field-controllable magnetorheological fluid damper", International Journal of Mechanical Sciences, 2010, Vol.52, no.8, pp.1036-1046.
61
[62] Chooi, Weng Wai, "Experimental characterisation of the properties of magnetorheological (MR) fluids and MR damper", PhD diss., The University of Manchester, 2005.
62
ORIGINAL_ARTICLE
استخراج مشخصههای لحظهای و بکارگیری آنها در شناسایی پارامترهای سازههای متغیر با زمان با استفاده از روشهای آنالیز ویولت و تجزیه مود تحلیلی-هیلبرت
خصوصیات و مشخصههای دینامیکی سازههای مهندسی ممکن است به علل مختلف و البته اغلب با گذر زمان، در طول عمرشان تغییر کنند. در این چنین سازههای مهندسی که میتوان برای آنها عبارت "سیستمهای متغیر با زمان" را بهکار برد، شناسایی پارامترهای دینامیکی متغیر با زمان از جمله فرکانس مودال لحظهای، بسیار مهم است چراکه میتواند به مهندسان در زیر نظر گرفتن وضعیت عملکردی سازهها کمک کند، همچنین با کمک آن آسیبهای سازهای را تشخیص داده و وضعیت سازه را با روشی مقرون به صرفه ارزیابی کنند. در واقع ابزارهایی که بتوانند در مسیر تحلیل این دست از سیستمها مشخصههایی همانند فرکانس لحظهای را به درستی کسب کنند، از اهمیت ویژهای برخوردار هستند. ابزار استخراج این نوع از مشخصهها از پاسخ دینامیکی، بهعنوان روشهای آنالیز حوزه زمان- فرکانس شناخته میشوند. از این مشخصههای لحظهای میتوان بهمنظور شناسایی پارامترهای زمان- متغیر موجود در این سازهها، همانند سفتی و دمپینگ زمان- متغیر، استفاده کرد.
در این مقاله، دو گروه از قدرتمندترین روشهای آنالیز حوزه زمان- فرکانس، یعنی آنالیز ویولت و آنالیز تجزیه مود تحلیلی- هیلبرت بهمنظور استخراج مشخصههای لحظهای بهکار گرفته میشوند. این دو دسته روش در استخراج این مشخصهها در مقام مقایسه با یکدیگر قرار گرفته، برتری آنها نسبت به یکدیگر در شرایط همراه با نوفه[i] و بدون نوفه مورد بررسی قرار میگیرد. سپس از ترکیب هر یک از این دو دسته روش با الگوریتمهای موجود در شناسایی پارامتری سیستمهای چند درجه آزادی متغیر با زمان، ترکیبهای جدیدی معرفی شده که بهبود عملکرد در شناسایی پارامترهای زمان- متغیر را گزارش میکنند.
[i]. Noise
https://jvs.isav.ir/article_242886_7d0dee6136129d7a49cb0a62ce3a5390.pdf
2021-02-19
36
53
فرکانس لحظهای
آنالیز ویولت
آنالیز تجزیه مود تحلیلی-هیلبرت
شناسایی پارامتری سازههای متغیر با زمان
امیر
گلستانه
amir_golestaneh@alumni.iust.ac.ir
1
آزمایشگاه آنالیز مودال، قطب مکانیک جامدات تجربی، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، نارمک، تهران، 16844، ایران.
LEAD_AUTHOR
حمید
احمدیان
ahmadian@iust.ac.ir
2
آزمایشگاه آنالیز مودال، قطب مکانیک جامدات تجربی، دانشکده مهندسی مکانیک، دانشگاه علم و صنعت ایران، نارمک، تهران، 16844، ایران.
AUTHOR
[1] Chui, C., “An Introduction to Wavelets”, Academic Press Inc. San Diego, USA, 1992.
1
[2] Staszewski, W. J. "Identification of non-linear systems using multi-scale ridges and skeletons of the wavelet transform", Journal of Sound and Vibration, 1998, Vol.214, no.4, pp.639-658.
2
[3] Kijewski, T., and A. Kareem, "Wavelet transforms for system identification in civil engineering", Computer‐Aided Civil and Infrastructure Engineering, 2003, Vol.18, no.5, pp.339-355.
3
[4] Ta, Minh-Nghi, and Joseph Lardiès, "Identification of weak nonlinearities on damping and stiffness by the continuous wavelet transform", Journal of sound and vibration, 2006, Vol.293, no.1-2, pp.16-37.
4
[5] Yan, B. F., Ayaho Miyamoto, and Eugen Brühwiler, "Wavelet transform-based modal parameter identification considering uncertainty", Journal of Sound and Vibration, 2006, Vol.291, no.1-2, pp.285-301.
5
[6] Lardies, Joseph, and Ta Minh-Ngi, "Modal parameter identification of stay cables from output-only measurements", Mechanical systems and signal processing, 2011, Vol.25, no.1, pp.133-150.
6
[7] Wang, Chao, Wei-Xin Ren, Zuo-Cai Wang, and Hong-Ping Zhu, "Instantaneous frequency identification of time-varying structures by continuous wavelet transform", Engineering Structures, 2013, Vol.52, pp.17-25.
7
[8] Carmona, René A., Wen L. Hwang, and Bruno Torrésani, "Characterization of signals by the ridges of their wavelet transforms", IEEE transactions on signal processing, 1997, Vol.45, no.10, pp.2586-2590.
8
[9] Ghanem, Roger, and Francesco Romeo, "A wavelet-based approach for the identification of linear time-varying dynamical systems", Journal of sound and vibration, 2000, Vol.234, no.4, pp.555-576.
9
[10] Huang, Norden E., Zheng Shen, Steven R. Long, Manli C. Wu, Hsing H. Shih, Quanan Zheng, Nai-Chyuan Yen, Chi Chao Tung, and Henry H. Liu, "The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis", Proceedings of the Royal Society of London. Series A: mathematical, physical and engineering sciences, 1998, Vol.454, no.1971, pp.903-995.
10
[11] Yang, Jann N., Ying Lei, Silian Lin, and Norden Huang, "Identification of natural frequencies and dampings of in situ tall buildings using ambient wind vibration data", Journal of engineering mechanics, 2004, Vol.130, no.5, pp.570-577.
11
[12] Shi, Z. Y., and S. S. Law, "Identification of linear time-varying dynamical systems using Hilbert transform and empirical mode decomposition method", 2007, pp.223-230.
12
[13] Shi, Z. Y., S. S. Law, and X. Xu, "Identification of linear time-varying mdof dynamic systems from forced excitation using Hilbert transform and EMD method", Journal of Sound and Vibration, 2009, Vol.321, no.3-5, pp.572-589.
13
[14] Wang, Zuocai, and Genda Chen, "Recursive Hilbert-Huang transform method for time-varying property identification of linear shear-type buildings under base excitations", Journal of engineering mechanics, 2012, Vol.138, no.6, pp.631-639.
14
[15] Chen, Genda, and Zuocai Wang, "A signal decomposition theorem with Hilbert transform and its application to narrowband time series with closely spaced frequency components", Mechanical systems and signal processing, 2012, Vol.28, pp.258-279.
15
[16] Wang, Zuo-Cai, and Gen-Da Chen, "Analytical mode decomposition of time series with decaying amplitudes and overlapping instantaneous frequencies", smart materials and structures, 2013, Vol.22, no.9, p.095003.
16
[17] Bedrosian, E. "A Product Theorem for Hilbert Transforms, Memorandum RM-3439-PM." 1962.
17
[18] Gao, Robert X., and Ruqiang Yan, “Wavelets: Theory and applications for manufacturing”, Springer Science & Business Media, 2010.
18
[19] Valikhani, Mohammad, and Davood Younesian, "Application of an optimal wavelet transformation for rail-fastening system identification in different preloads," Measurement, 2016, Vol.82, pp.161-175.
19
ORIGINAL_ARTICLE
تحلیل ارتعاشی و بررسی تغییرات فشار بر روتور توربین با تاکید بر تعامل کوپل و بدون کوپل سازه و سیال
پره توربین وظیفه استخراج انرژی در فشار بالا را دارد که در معرض نیروی گریز از مرکز و نیروهای سیال قرار میگیرد. در این مقاله ابتدا تحلیل ارتعاشی پره توربین و تأثیر فشار وارد بر سطح روتور[i] در تعامل سازه و سیال بررسی شده است. سپس با مدلسازی و صحتسنجی نتایج و کوپل سیال و سازه، میزان جابهجایی و تغییر فرکانس ارتعاشی پره توربین در سه جنس مختلف بررسی میگردد. نتایج نشان میدهد با افزایش سرعت ورودی جریان سیال، میزان فشار وارد بر روتور افزایش یافته و در نتیجه دامنه نوسانات ارتعاشی نیز افزایش مییابد. همچنین نتایج حاصل از کوپل دوطرفه نشان میدهد که تغییرات فشار بر روی روتور در حالت کوپل کمتر و ملایمتر از حالت بدون کوپل است. فشار وارد بر سطح روتور از جلوی روتور به مرکز روتور حرکت کرده و همچنین فشار در حالت کوپل در سطح پایینی روتور افزایش و در سطح بالایی روتور کاهش یافته است.
[i]. Rotor
https://jvs.isav.ir/article_242884_06e3ee3aa31adead52758de0981d40b8.pdf
2021-02-19
54
67
ارتعاشات
آنالیز مودال
روتور توربین
تغییرات فشار
تعامل سازه و سیال
محمد رضا
الهامی
melhami@ihu.ac.ir
1
دانشگاه جامع امام حسین (ع)
AUTHOR
محمد رضا
نجفی
najafi.m@ihu.ac.ir
2
گروه مهندسی مکانیک، دانشکده فنی و مهندسی، دانشگاه جامع امام حسین (ع)، تهران، ایران
LEAD_AUTHOR
[1] Bazilevs, Yuri, Kenji Takizawa, and Tayfun E. Tezduyar, “Computational fluid-structure interaction: methods and applications”, John Wiley & Sons, 2013.
1
[2] Souli, M'hamed, and David J. Benson, eds., “Arbitrary Lagrangian Eulerian and fluid-structure interaction: numerical simulation” John Wiley & Sons, 2013.
2
[3] تشکری بافقی، محمد، الهامی، محمدرضا، و ربیعی، علیرضا، "تحلیل عددی پدیده تعامل سیال-سازه بر روی پره توربین"، نشریه علمی مکانیک سیالات و آیرودینامیک، دوره 4، شماره 2، پاییز و زمستان 1394.
3
[4] Farhat, C., “Parallel and distributed solution of coupled nonlinear dynamic aeroelastic response problems”, J. Wiley & Sons, 1997.
4
[5] Rifai, Steven M., Zdeněk Johan, Wen-Ping Wang, Jean-Pierre Grisval, Thomas JR Hughes, and Robert M. Ferencz, "Multiphysics simulation of flow-induced vibrations and aeroelasticity on parallel computing platforms", Computer methods in applied mechanics and engineering, 1999, Vol.174, no.3-4, pp.393-417.
5
[6] Pahlke, Klausdieter, "Berechnung von Strömungsfeldern um Hubschrauberrotoren im Vorwärtsflug durch die Lösung der Euler-Gleichungen”, PhD diss., 1999.
6
[7] Hierholz, Karl-Heinz, “Ein numerisches Verfahren zur Simulation der Strömungs-Struktur-Interaktion am Hubschrauberrotor”, VDI-Verlag, 1999.
7
[8] Dubini, G., Riccardo Pietrabissa, and Franco Maria Montevecchi, "Fluid-structure interaction problems in bio-fluid mechanics: a numerical study of the motion of an isolated particle freely suspended in channel flow", Medical engineering & physics, 1995, Vol.17, no.8, pp.609-617.
8
[9] Peskin, Charles S., "The immersed boundary method", Acta numerica, 2002, Vol.11, pp.479-517.
9
[10] Hou, Gene, Jin Wang, and Anita Layton, "Numerical methods for fluid-structure interaction—a review", Communications in Computational Physics, 2012, Vol.12, no.2, pp.337-377.
10
[11] Stodola, Aurel, “Steam and gas turbines: with a supplement on the prospects of the thermal prime mover”, Vol.2, McGraw-Hill, 1927.
11
[12] Dimitriadis, E. K., "The Vibration of Packeted-Bladed Discs Alloys", PhD diss., MSc. Thesis., Imperial College, 1979.
12
[13] Salama, A. L., and M. Petyt, "Dynamic response of packets of blades by the finite element method”, Trans ASME, Journal of Mechanical Design, 1978, Vol.100, no.41978, pp.660-666.
13
[14] Judge, John, Christophe Pierre, and Oral Mehmed, "Experimental investigation of mode localization and forced response amplitude magnification for a mistuned bladed disk", J. Eng. Gas Turbines Power, 2001, Vol.123, no.4, pp.940-950.
14
[15] Gordon, Robert, and Joseph Hollkamp, "An experimental investigation of non-uniform damping in blade-disk assemblies", In 34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 1998, p.3747
15
[16] Roemer, Michael J., Stephen H. Hesler, and Neville F. Rieger, "On-site modal testing of low-pressure turbine blade rows", Sound and Vibration, 1994, Vol.28, no.5, pp.16-22.
16
[17] Orsagh, R. F., and M. J. Roemer, “Examination of Successful Modal Analysis Techniques Used for Bladed-Disk Assemblies”, IMPACT TECHNOLOGIES LLC ROCHESTER NY, 2002.
17
[18] Pereira, J. C., L. A. M. Torres, Tractebel Energia, E. da Rosa, and H. Bindewald, "A Low Cycle Fatigue Analysis on a Steam Turbine Bladed Disk-Case Study", In 12th IFTMMMWorld Congress, 2007, pp. 18-21.
18
[19] Hou, Jianfu, and Bryon J. Wicks, “Root flexibility and untwist effects on vibration characteristics of a gas turbine blade”, DEFENCE SCIENCE AND TECHNOLOGY ORGANIZATION VICTORIA (AUSTRALIA) PLATFORM SCIENCES LAB, 2002.
19
[20] Forbes, Gareth L., Osama N. Alshroof, and Robert B. Randall, "Fluid-structure interaction study of gas turbine blade vibrations", Australian Journal of Mechanical Engineering, 2011, Vol.8, no.2, pp.143-150.
20
[21] Alshroof, O., Gareth Forbes, and R. Randall, "Relationship between the pressure at the casing wall and at the blade tip for a vibrating turbine blade", In Proceedings of the 17th Australasian Fluid Mechanics Conference., Australasian Fluid Mechanics Society, 2010.
21
[22] Alshroof, Osama N., Gareth L. Forbes, Nader Sawalhi, Robert B. Randall, and Guan H. Yeoh, "Computational fluid dynamic analysis of a vibrating turbine blade", International Journal of Rotating Machinery, 2012.
22
[23] Badshah, Mujahid, Saeed Badshah, and Kushsairy Kadir, "Fluid structure interaction modelling of tidal turbine performance and structural loads in a velocity shear environment", Energies, 2018, Vol.11, no.7, p.1837.
23
[24] Badshah, Mujahid, Saeed Badshah, and Sakhi Jan, "Comparison of computational fluid dynamics and fluid structure interaction models for the performance prediction of tidal current turbines", Journal of Ocean Engineering and Science, 2020, Vol.5, no.2, pp.164-172.
24
[25] Gu, Jintong, Fulin Cai, Norbert Müller, Yuquan Zhang, and Huixiang Chen, "Two-Way Fluid–Solid Interaction Analysis for a Horizontal Axis Marine Current Turbine with LES", Water, 2020, Vol.12, no.1, p.98.
25
[26] Zeyu, Zhang, Hui Jizhuang, Suo Xuefeng, Zhang Fuqiang, and Lei Jingyuan, "Fluid-solid interaction analysis of torque converters", High Technology Letters, 2019, pp.239-244.
26
[27] S. S. Rao, “Mechanical Vibrations”, Pearson Prentice Hall, Upper Saddle River, NJ, USA, 4th edition,2004.
27
[28] G. Genta, “Dynamics of Rotating systems”, Springer, 2005.
28
ORIGINAL_ARTICLE
اثر کششسطحی محیط مایع بر بازدهی فرآیند ساخت نانو-پوستههای دیسولفیدمولیبدن با استفاده از پروب فراصوت
در این مقاله، نانو پوستههای دو بعدی دیسولفیدمولیبدن [i](MoS2) با استفاده از یک پروب فراصوت در محیطهای گوناگون مایع تولید شدهاند. به علت اثر کلیدی کشش سطحی در فرایند پوستهسازی و نیز بهمنظور کاهش آثار منفی پسماندهای آزمایش بر محیط زیست، از محلولی استفاده شد که از ترکیب آب و اتانول با نسبت حاصل از رابطه اختلاط کانورس- رایت تشکیل شده است. نتایج طیفسنجی فرابنفش- مرئی نشان میدهد که با استفاده از محلول مذکور، در مقایسه با سایر مایعات مورد آزمایش، بهترین بازدهی یا بهعبارتی کمترین ضخامت برای پوستهها حاصل میشود. تصاویر تهیه شده با میکروسکوپ الکترونی روبشی و میکروسکوپ الکترونی عبوری و نتایج حاصل از پراش پرتو X از نمونهای که بهترین نتیجه طیفسنجی فرابنفش- مرئی را نشان داده است، نیز شواهدی بر موفقیت فرایند پوستهسازی و تولید تکلایههای دیسولفیدمولیبدن هستند. [i]. Molybdenum disulfide
https://jvs.isav.ir/article_242883_4ab2fa75491da6d57fd201f8be532456.pdf
2021-02-19
68
77
پروب فراصوت
نانو پوستههای MoS2
کشش سطحی
رابطه کانورس-رایت
ضخامت لایههای دو بعدی
نجمه السادات
تقوی
najmehtaghavi80@gmail.com
1
دانشجوی دکتری فیزیک دانشگاه صنعتی خواجه نصیرالدین طوسی- دانشکده فیزیک
LEAD_AUTHOR
رضا
افضل زاده
afzalzadeh@kntu.ac.ir
2
استاد گروه ماده چگال/ دانشکده فیزیک/ دانشگاه صنعتی خواجه نصیرالدین طوسی
AUTHOR
[1] صادقی، م.، عبداله، ا.، فلاحی آرزودار، ع. و عابدینی، ر.، "تاثیر ارتعاشات اولتراسونیک بر فعالسازی، تحرک و چگالی نابجاییها در مواد فلزی"، نشریه علمی صوت و ارتعاش، 1393، شماره 6، دوره 3، صفحه 33-46.
1
[2] Pokhrel, N., Vabbina, P. K., and Pala, N., “Sonochemistry: Science and Engineering”, Ultrasonics Sonochemistry, 2016, Vol.29, pp.104-128. https://doi.org/10.1016/j.ultsonch.2015.07.023.
2
[3] Bang, J. H., and Suslick, K. S., “Applications of Ultrasound to the Synthesis of Nanostructured Materials”, Adv. Mater, 2010, Vol.22, pp. 1039–1059. https://doi.org/10.1002/adma.200904093.
3
[4] شاطرآبادی، د.، ابونجمی، م.، قربانی جاوید، م. و عرب حسینی، ا.، "مقایسه روش فراصوت با دیگر روشهای نوین در استخراج عصاره گیاهان دارویی"، نشریه علمی صوت و ارتعاش، 1396، شماره 12، دوره 6، صفحه 15-30.
4
[5] Han, Sang A., Ravi Bhatia, and Sang-Woo Kim. "Synthesis, properties and potential applications of two-dimensional transition metal dichalcogenides." Nano Convergence, 2016, Vol.2, no.1, pp.1-14. https://doi.org/10.1186/s40580-015-0048-4.
5
[6] Backes C. et al., “Guidelines for Exfoliation, Characterization and Processing of Layered Materials Produced by Liquid Exfoliation”, Chemistry of materials, 2017, vol.29, pp.243−255. https://doi.org/10.1021/acs.chemmater.6b03335.
6
[7] تقوی، ن. و افضلزاده، ر.، "اثر تغییرات توان تراگذار فراآوایی و زمان تابش امواج فراآوا بر ضخامت نانو-پوستههای دو-بعدی دیسولفیدمولیبدن ساختهشده به روش آوافیزیک"، مجله علمی پژوهشی انجمن مهندسی صوتیات ایران، 1398، شماره 1، جلد 7، صفحه 50-57.
7
[8] Bonaccorso F., Lombardo A., Hasan T., Sun Z., Colombo L., and Ferrari C., “Production and Processing of graphene and 2d crystals”, Materials Today, 2012, vol.15, no.12, pp.564-589. https://doi.org/10.1016/S1369-7021(13)70014-2.
8
[9] Jawaid A. et al., “Mechanism for Liquid-Phase exfoliation of MoS2”, Chemistry of Materials, 2016, vol.28,pp.337-348. https://doi.org/10.1021/acs.chemmater.5b04224.
9
[10] Kim T. H., and Kim S. G., “Clinical Outcomes of Occupational Exposure to N, N-Dimethylformamide: Perspectives from Experimental Toxicology”, Safety and health at work, 2011, vol.2, no.2, pp.97-104. https://doi.org/10.5491/SHAW.2011.2.2.97.
10
[11] Galvao J., Davis B., Tilley M., Normando E., Duchen M. R., and Cordeiro M. F., “Unexpected low‐dose toxicity of the universal solvent DMSO”, The FASEB Journal, 2014, vol.28, no.3, pp.1317-1330. https://doi.org/10.1096/fj.13-235440.
11
[12] Marcus Y., “Extraction by Subcritical and Supercritical Water, Methanol, Ethanol and Their Mixtures” Separations, 2018, vol.5, no.1, p.4. https://doi.org/10.3390/separations5010004.
12
[13] Capello C., and Fischer U., “What is a green solvent? A comprehensive framework for the environmental assessment of solvents”, Green Chemistry,2007, vol.9, no.9, pp.927-934. https://doi.org/10.1039/B617536H.
13
[14] میرزایی، ب.، "ارایه قانون اختلاط جدید برای پیشبینی کشش سطحی مخلوطها "، نشریه علمی-پژوهشی شیمی و مهندسی شیمی ایران، 1393، شماره 2، دوره 33، صفحه 47-53.
14
[15] Connors K. A., and Wright J., “Dependence of Surface Tension on Composition of Binary Aqueous-Organic Solutions”, Analytical Chemistry, 1989, vol.61, no.3, pp.194-198. https://doi.org/10.1021/ac00178a001.
15
[16] Qiao W. et al., “Effects of ultrasonic cavitation intensity on the efficient liquid-exfoliation of MoS2 nanosheets”, Rsc Advances, 2014, vol.4, no.92, pp.50981-50987. https://doi.org/10.1039/C4RA09001B.
16
[17] Vella, Daniele, Victor Vega-Mayoral, Christoph Gadermaier, Natasa Vujicic, Tetiana Borzda, Peter Topolovsek, Matej Prijatelj, Iacopo Tempra, Eva Arianna Aurelia Pogna, and Giulio Cerullo, "Femtosecond spectroscopy on MoS 2 flakes from liquid exfoliation: surfactant independent exciton dynamics", Journal of Nanophotonics, 2015, Vol.10, no.1, p.012508. https://doi.org/10.1117/1.JNP.10.012508.
17
[18] Zhu, Juntong, Jiang Wu, Yinghui Sun, Jianwen Huang, Yufei Xia, Hao Wang, Haibo Wang, Yun Wang, Qinghua Yi, and Guifu Zou. "Thickness-dependent bandgap tunable molybdenum disulfide films for optoelectronics." RSC advances, 2016, Vol.6, no.112, pp.110604-110609. https://doi.org/10.1039/C6RA22496B.
18
[19] Tauc, J., and A. Menth, "States in the gap", Journal of non-crystalline solids, 1972, Vol.8, pp.569-585. https://doi.org/10.1016/0022-3093(72)90194-9
19
[20] Backes, Claudia, Ronan J. Smith, Niall McEvoy, Nina C. Berner, David McCloskey, Hannah C. Nerl, Arlene O’Neill et al., "Edge and confinement effects allow in situ measurement of size and thickness of liquid-exfoliated nanosheets", Nature communications, 2014, Vol.5, no.1, pp.1-10. https://doi.org/10.1038/ncomms5576
20
[21] Liu, Y. D., L. Ren, X. Qi, L. W. Yang, G. L. Hao, J. Li, X. L. Wei, and J. X. Zhong, "Preparation, characterization and photoelectrochemical property of ultrathin MoS2 nanosheets via hydrothermal intercalation and exfoliation route", Journal of alloys and compounds, 2013, Vol.571, pp.37-42. https://doi.org/10.1016/j.jallcom.2013.03.031.
21
[22] Tonndorf, P., Schmidt, R., Böttger, P., Zhang, X., Börner, J., Liebig, A., Albrecht, M., Kloc, C., Gordan, O., Zahn, D.R. and De Vasconcellos, S.M., 2013, “Photoluminescence emission and Raman response of monolayer MoS 2, MoSe 2, and WSe 2”, Optics express, 2013, Vol.21, no.4, pp.4908-4916. https://doi.org/10.1364/OE.21.004908.
22
ORIGINAL_ARTICLE
نتایج اجرای برنامه نت پیش بینانه مبتنی بر ترموگرافی، آنالیز ارتعاشات و آکوستیک امیشن در یکی از میادین نفتی کشور
بهمنظور اجرای درست روشهای پایش وضعیت لازم است هر روش بهصورت اصولی اجرایی شده و نتایج بهدست آمده از هر روش با نتایج خروجی روشهای دیگر مقایسه گردد. در برخی موارد ممکن است در عیبیابیها، یک روش خاص کارا باشد ولی در بیشتر موارد میتوان گفت که تجمیع روشهای مختلف به تصمیمگیری درست کمک شایانی میکند. در پژوهش جاری ضمن تشریح چگونگی استفاده از روشهای پایش وضعیت مختلف، به دستاوردهای حاصل از اجرای همزمان این روشها در یکی از میادین نفتی کشور پرداخته شده است.
https://jvs.isav.ir/article_243199_b4821c983d61bc9b03ba6eee3c07aa9d.pdf
2021-02-19
78
90
پایش وضعیت
آنالیز ارتعاشات
ترموگرافی
آکوستیک امیشن
نت پیشبینانه
سعید
شیروانی شاه عنایتی
s_sh665@yahoo.com
1
کارشناس پایش وضعیت شرکت راه اندازی و بهره برداری صنایع نفت OICO
LEAD_AUTHOR
[1] Douglas Plucknett,“Reliability Centered Maintenance using RCM Blitz”, 2011.
1
[2] Caesarendra, Wahyu, Buyung Kosasih, Anh Kiet Tieu, Hongtao Zhu, Craig AS Moodie, and Qiang Zhu, "Acoustic emission-based condition monitoring methods: Review and application for low speed slew bearing", Mechanical Systems and Signal Processing, 2016, Vol.72, pp.134-159.
2
[3] Vishwakarma, Manish, Rajesh Purohit, V. Harshlata, and P. Rajput, "Vibration analysis & condition monitoring for rotating machines: a review", Materials Today: Proceedings, 2017, Vol.4, no.2, pp.2659-2664.
3
[4] Bagavathiappan, Subramaniam, B. B. Lahiri, T. Saravanan, John Philip, and T. Jayakumar, "Infrared thermography for condition monitoring–A review", Infrared Physics & Technology, 2013, Vol.60, pp.35-55.
4
ORIGINAL_ARTICLE
کنترل مرزی رایزر دریایی انعطاف پذیر با فرض پروفیلهای خطی و نمایی برای جریان سطحی
در این مقاله، با استفاده از روش مستقیم لیاپانوف[i]، کنترل مرزی در انتهای بالایی لوله قائم انجام میشود تا زاویۀ نوک و ارتعاش عرضی لوله قائم که در معرض اغتشاش زمان متغیر قرار دارد کاهش داده شود. ابتدا، فرض میشود جریان سطح آب از سطح اقیانوس تا کف اقیانوس بهصورت خطی کاهش یافته و به صفر برسد و سپس در حالت دوم بهصورت نمایی به صفر کاهش یابد. رایز بهصورت یک سامانه با پارامتر توزیع یافته با یک معادله دیفرانسیل جزئی[ii](PDE) به همراه شرایط مرزی مدل میشود. به این دلیل که همه سیگنالهای کنترلی را میتوان با حسگرها اندازهگیری و یا با الگوریتم تفاضل برگشتی محاسبه کرد، کنترل مرزی را میتوان با ابزار دقیق موجود بهصورت عملی محقق و پیادهسازی کرد. روش مستقیم لیاپانوف بهمنظور تحلیل پایداری سیستم حلقه بسته بهکار رفته است. در نهایت، کارایی این کنترل کننده تأیید شده و نتایج پروفیلهای خطی و نمایی با هم مقایسه میشوند.
[i]. Lyapunov
[ii]. partial differential equation
https://jvs.isav.ir/article_243465_56c815246afed56ca52110ba2d99c836.pdf
2021-02-19
91
105
کنترل مرزی
رایزر دریایی
روش لیاپانوف
پروفیل خطی
پروفیل نمایی
منوچهر
صالحی
msalehi@aut.ac.ir
1
طراحی جامدات، دانشکده مهندسی مکانیک، دانشگاه صنعتی امیر کبیر، تهران، ایران
LEAD_AUTHOR
فیروز
بختیاری نژاد
bakhtifx@pgcc.edu
2
استاد باز نشسته دانشگاه صنعتی امیر کبیر
AUTHOR
ارسطو
عظیمی
azimi.arastoo@aut.ac.ir
3
دانشکده مهندسی مکانیک، دانشگاه صنعتی امیرکبیر
AUTHOR
[1] Chen, Yung-Hsiang, and Fu-Ming Lin, "General drag-force linearization for nonlinear analysis of marine risers", Ocean engineering, 1989, Vol.16, no.3, pp.265-280.
1
[2] Young, R. D., Joe R. Fowler, E. A. Fisher, and R. R. Luke, "Dynamic analysis as an aid to the design of marine risers", 1978, pp: 200-205. [3] Patel, M. H., and A. S. Jesudasen, "Theory and model tests for the dynamic response of free hanging risers", Journal of sound and vibration, 1987, Vol.112, no.1, pp.149-166.
2
[4] Kaewunruen, Sakdirat, Julapot Chiravatchradej, and Somchai Chucheepsakul, "Nonlinear free vibrations of marine risers/pipes transporting fluid", Ocean Engineering, 2005, Vol.32, no.3-4, pp.417-440.
3
[5] Siciliano, Bruno, and Wayne J. Book, "A singular perturbation approach to control of lightweight flexible manipulators", The International Journal of Robotics Research, 1988, Vol.7, no.4, pp.79-90.
4
[6] Vandegrift, M. W., Frank L. Lewis, and S. Q. Zhu, "Flexible‐link robot arm control by a feedback linearization/singular perturbation approach", Journal of Robotic Systems, 1994, Vol.11, no.7, pp.591-603.
5
[7] Christofides, Panagiotis D., and Antonios Armaou, "Global stabilization of the Kuramoto–Sivashinsky equation via distributed output feedback control", Systems & Control Letters, 2000, Vol.39, no.4, pp. 283-294.
6
[8] Ge, Shuzhi Sam, Tong Heng Lee, and Z. P. Wang, "Model-free regulation of multi-link smart materials robots", IEEE/ASME transactions on mechatronics, 2001, Vol.6, no.3, pp.346-351.
7
[9] Shahruz, S. M., and L. G. Krishna, "Boundary control of a non-linear string", Journal of Sound and Vibration, 1996, Vol.195, no.1, pp.169-174.
8
[10] Shahruz, Shahram M., "Suppression of vibration in stretched strings by the boundary control", In Proceedings of the 36th IEEE Conference on Decision and Control, 1997, vol.1, pp.535-536. IEEE, 1997.
9
[11] Baicu, C. F., Christopher D. Rahn, and B. D. Nibali,"Active boundary control of elastic cables: theory and experiment", Journal of Sound and Vibration, 1996, Vol.198, no.1, pp.17-26.
10
[12] Tanaka, Nobuo, and Hiroyuki Iwamoto, "Active boundary control of an Euler–Bernoulli beam for generating vibration-free state", Journal of sound and vibration, 2007, Vol.304, no.3-5, pp.570-586.
11
[13] Sakawa, Y., Matsuno, F., and Fukushima, S., Modeling and Feedback Control of a Flexible Arm. Journal of Robotic Systems, 1985.2 (4): p. 453–472.
12
[14] Weaver Jr, William, Stephen P. Timoshenko, and Donovan Harold Young, “Vibration problems in engineering”, John Wiley & Sons, 1990.
13
[15] Goldstein, Herbert, Ch Poole, and J. Safko, "Classical Mechanics Addison-Wesley", Reading, MA, 1980, p.426.
14
[16] Blevins, Robert D., "Flow-induced vibration", New York, 1977.
15
[17] Faltinsen, Odd, “Sea loads on ships and offshore structures”, Vol.1, Cambridge university press, 1993.
16
[18] Feng, S. Z., F. Q. Li, and S. J. Li, "An introduction to marine science", China Higher Education Press, Beijing, China, 1999.
17
[19] Dawson, D. M., Z. Qu, F. L. Lewis, and J. F. Dorsey, "Robust control for the tracking of robot motion", International Journal of Control, 1990, Vol.52, no.3, pp.581-595.
18
[20] Ge, Shuzhi Sam, and Cong Wang, "Adaptive neural control of uncertain MIMO nonlinear systems", IEEE Transactions on Neural Networks, 2004, Vol.15, no.3, pp.674-692.
19
[21] Rahn, Christopher D., and C. D. Rahn, “Mechatronic control of distributed noise and vibration”, New York, NY: Springer-Verlag, 2001.
20
[22] Hardy, G., J. Littlewood, and G. Polya, “Inequalities”, cambridge univ. Press, Cambridge, 1952.
21
[23] De Queiroz, Marcio S., Darren M. Dawson, Siddharth P. Nagarkatti, and Fumin Zhang. “Lyapunov-based control of mechanical systems”, Springer Science & Business Media, 2012.
22
ORIGINAL_ARTICLE
بهینهسازی عملکرد آکوستیکی در ورقهای ساندویچی با هسته لانه زنبوری
بهمنظور مقابله با مشکلات آلودگی صوتی، طراحی سیستمها و سازههایی که بتوانند کنترل هدفمندی بر روی انتشار امواج صوتی داشته باشند، از اهمیت بالایی برخوردار است. یکی از روشهای رایج و پرکاربرد در کنترل آلودگی صوتی استفاده از ورقهای ساندویچی بهعنوان عایق آکوستیکی است. ویژگی بارز این نوع ورقها قابلیت تغییرپذیری بالای هسته آنها است به نحوی که با تغییر جنس و چیدمان هسته، خواص صوتی و مکانیکی ورق تغییر میکند. در سالهای اخیر از ساختارهای لانه زنبوری بهعنوان هسته ورقهای ساندویچی استفاده شده است. هستههای لانه زنبوری بهعلت ویژگی وزن کم و سختی بالا، گزینه مناسبی برای طراحی عایقهای صوتی محسوب میشوند. ویژگیهای متنوع و مشخصههای مختلف ساختار لانه زنبوری از جمله هندسه سلولی، جنس سازه بهکار رفته و نوع چیدمان و نحوه جهتگیری سلولها در کنار یکدیگر، این موضوع را نشان میدهد که ساختار بهینهای طراحی شود تا رفتار آکوستیکی مناسبتری از این ساختار بهدست آید. در این پژوهش از الگوریتم ژنتیک بهمنظور بهبود عملکرد آکوستیکی ساختار ورق ساندویچی با هسته لانه زنبوری استفاده شده است. این بهینهسازی برای دو نوع جهتگیری معمول سلولهای لانه زنبوری و با درنظر گرفتن اینکه ورق تحت بارگذاری درون صفحهای قرار دارد، انجام شده است. عمل بهینهسازی بر روی متغیرهای هندسی سلول لانه زنبوری برای تعدادی از مواد با خواص فیزیکی و مکانیکی مختلف، صورت پذیرفته است و هدف، کاهش عبور صوت از این ورق در محدوده فرکانسی پایین بوده است. به این دلیل، بیشینه کردن ضریب افت انتقال صدا مورد توجه قرار گرفته است. نتایج نشان میدهد موادی که جرم بالا و سختی نسبتا کمتری دارند عایق صوتی مناسبتری محسوب میشوند.
https://jvs.isav.ir/article_244179_0ec12dfa637a790b7d9fec3e225d9634.pdf
2021-02-19
106
114
اکوستیک
پنل ساندویچی
هسته لانه زنبوری
الگوریتم ژنتیک
ریحانه
اسماعیلی
reyhaneh.esmaeili@ut.ac.ir
1
دانشگاه تهران
LEAD_AUTHOR
[1] Wang, Tongan, Shan Li, Shankar Rajaram, and Steven R. Nutt, "Predicting the sound transmission loss of sandwich panels by statistical energy analysis approach", Journal of Vibration and Acoustics, 2010, Vol.132, no.1.
1
[2] Lang, Mark A., and Clive L. Dym, "Optimal acoustic design of sandwich panels", The Journal of the Acoustical Society of America, 1975, Vol.57, no.6, pp.1481-1487.
2
[3] Toyoda, Masahiro, Kimihiro Sakagami, Daiji Takahashi, and Masayuki Morimoto, "Effect of a honeycomb on the sound absorption characteristics of panel-type absorbers", Applied acoustics, 2011, Vol.72, no.12, pp.943-948.
3
ORIGINAL_ARTICLE
محاسبه نویز حول هندسههای دوبعدی ایرفویل با استفاده از یک روش تئوری کارآمد
در این تحقیق، یک الگوریتم عددی مؤثر و کارآمد بر پایه روشهای تئوری محاسبه نوفه[i] در جریانهای آیرودینامیکی حول هندسههای دوبعدی ارائه میشود. در این راستا، روشهای تئوری برای تخمین انواع نوفه حاصل از اندرکنش جریان با سطح مقطع ایرفویل آورده شده و نحوه تعمیم آنها به مدلسازی نوفه کلی جریان ارائه شده است. معادلات حاکم استخراج شده و یک حلگر عددی آکوستیک برای مقاطع دوبعدی توسعه داده شده است. با استفاده از این حلگر، میدان جریان و اکوستیک حول دو هندسه مرجع دوبعدی شبیهسازی شده و نتایج بهدست آمده گزارش شدهاند. نتایج بهدست آمده از حلگر حاضر برای شبیهسازی و تحلیل نوفه حول بالهای شبه سه بعدی با دو هندسه ایرفویل NACA0012 و S822 و مقایسه آنها با نتایج تجربی و عددی نشان میدهند که این حلگر با دقت خوب و سرعت اجرای بالا، قابلیت تعیین مشخصات آیرواکوستیکی را در هندسههای دوبعدی/ شبه سه بعدی به خوبی دارا است.
[i]. Noise
https://jvs.isav.ir/article_243706_c485f56bb1cab80d4732bcd305422283.pdf
2021-02-19
115
128
روش های تئوری
تخمین نویز
هندسه های دوبعدی
ایرفویل
اعتبارسنجی الگوریتم عددی
اسلام
عزت نشان
e_ezzatneshan@sbu.ac.ir
1
گروه مهندسی هوافضا، دانشکده فناوری های نوین و مهندسی هوافضا، دانشگاه شهید بهشتی، تهران، ایران
LEAD_AUTHOR
[1] Tam, Christopher K.W., "Computational aeroacoustics: An overview of computational challenges and applications", International Journal of Computational Fluid Dynamics, 2004, Vol.18, no.6, pp.547-567.
1
[2] Larsson, Johan, Lars Davidson, Magnus Olsson, and Lars-Erik Eriksson, "Aeroacoustic investigation of an open cavity at low Mach number", AIAA journal, 2004, Vol.42, no.12, pp.2462-2473. [3] Tsai, Chien-Hsiung, Lung-Ming Fu, Chang-Hsien Tai, Yen-Loung Huang, and Jik-Chang Leong, "Computational aero-acoustic analysis of a passenger car with a rear spoiler", Applied Mathematical Modelling, 2009, Vol.33, no.9, pp.3661-3673.
2
[4] Ask, Jonas, and Lars Davidson, "Flow and dipole source evaluation of a generic SUV", Journal of Fluids Engineering, 2010, Vol.132, no.5.
3
[5] Howe, Michael S., "Aerodynamic noise of a serrated trailing edge", Journal of Fluids and Structures, 1991, Vol.5, no.1, pp.33-45.
4
[6] Lighthill, Michael James, "On sound generated aerodynamically I. General theory", Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences 1952, Vol.211, no.1107, pp.564-587.
5
[7] Amiet, Roy K., "Acoustic radiation from an airfoil in a turbulent stream", Journal of Sound and vibration, 1975, Vol.41, no.4, pp.407-420.
6
[8] Amiet, Roy K., "Noise due to turbulent flow past a trailing edge", Journal of sound and vibration, 1976, Vol.47, no.3, pp.387-393.
7
[9] Lowson, Martin V., "A new prediction model for wind turbine noise", In International Conference on Renewable Energy-Clean Power 2001, 1993, pp.177-182, IET, 1993.
8
[10] G. Guidati, "Berechnung und Verminderung von Str¨omungsger¨auschen an Profilen," PhD, Institute of Aerodynamics and Gasdynamics, University of Stuttgart, 2003.
9
[11] Moriarty, Patrick, Gianfranco Guidati, and Paul Migliore, "Prediction of turbulent inflow and trailing-edge noise for wind turbines", In 11th AIAA/CEAS Aeroacoustics Conference, 2005, p.2881. [12] Blandeau, Vincent P., and Phillip F. Joseph, "Validity of Amiet's model for propeller trailing-edge noise", AIAA journal, 2011, Vol.49, no.5, pp.1057-1066.
10
[13] Gill, James R., Xin Zhang, and Phillip Joseph, "Effects of real airfoil geometry on leading edge gust interaction noise", In 19th AIAA/CEAS Aeroacoustics Conference, 2013, p. 2203.
11
[14] Brooks, Thomas F., D. Stuart Pope, and Michael A. Marcolini, Airfoil self-noise and prediction, Vol.1218. Washington, DC: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.
12
[15] Wagner, S., R. Bareiss, and G. Guidati, "Wind Turbine Noise”, Springer, New York, 1996.
13
[16] Snyder, William H., “Guideline for fluid modeling of atmospheric diffusion”, Vol. 81, no.9. Environmental Sciences Research Laboratory, Office of Research and Development, US Environmental Protection Agency, 1981.
14
[17] Counihan, J. O., "Adiabatic atmospheric boundary layers: a review and analysis of data from the period 1880–1972", Atmospheric Environment, 1975, Vol.9, no.10, pp.871-905.
15
[18] Drela, Mark, and Michael B. Giles, "Viscous-inviscid analysis of transonic and low Reynolds number airfoils", AIAA journal 1987, Vol.25, no.10, pp.1347-1355.
16
[19] WHITFIELD, DL., "Integral solution of compressible turbulent boundary layers using improved velocity profiles, [Final Report, Mar.- Nov. 1977]", 1978.
17
[20] Blake, William K., "Mechanics of flow-induced sound and vibration. Volume 1 General concepts and elementary source. Volume 2-Complex flow-structure interactions", Aplikace Matematiky, Applied Mathematics, Vol.1, 1986.
18
[21] Rodrigues, Simao Santos, "Aeroacoustic optimization of wind turbine blades”, PhD diss., MSc Thesis, Instituto Superior Tecnico, Lisboa, 2012.
19
[22] Migliore, Paul, and Stefan Oerlemans, "Wind tunnel aeroacoustic tests of six airfoils for use on small wind turbines", J. Sol. Energy Eng., 2004, Vol.126, no.4, pp.974-985.
20
ORIGINAL_ARTICLE
محاسبه و تحلیل داده های آکوستیکی تالار چند منظوره، نمونه موردی: خانه موسیقی گرگان
کیفیت صوتی سالنهای اجتماعات از ویژگیهای کلیدی نتایج طراحی معماری آنها است که تا پیش از ظهور نرمافزارهای شبیهساز، کنترل پیش از ساخت آن با سختی روبهرو بود. روشهای نرمافزاری که امروزه مورد استفاده قرار میگیرد بهطور نسبتا دقیقی شرایط آکوستیکی پس از ساخت را کنترل میکنند. سالن چند منظورهای که در این پژوهش مورد تجزیه و تحلیل قرار گرفته است بخشی از پروژه طراحی خانه موسیقی گرگان بوده که در منطقه مرکزی شهر گرگان طراحی شده است. هدف از ایجاد سالن چند منظوره، بهوجود آوردن فضایی است که همزمان برای موسیقی و سخنرانی مناسب باشد. با توجه به تضاد ذاتی آکوستیکی موجود در شرایط اجرای موسیقی و سخنرانی، استفاده از سه راهکار کلی پیشنهاد شده است. براساس سوابق پژوهش زمان واخنش بهعنوان کلیدیترین رکن طراحی سالنهای موسیقی و سخنرانی انتخاب شد که این مقدار بهطور متوسط برای سخنرانی 0/1 و موسیقی 0/2 ثانیه درنظر گرفته شد. با داشتن حجم سالن و سطوح تأثیرگذار جاذب و پخشاگر، ضرائب جذب صدای قسمتهای مختلف سالن بهدست آمد. با توجه به دادههای مفروض طرح مقادیر C50، C80، ALcons، CD، SPL و نسبت D/R هم برای سخنرانی و هم برای موسیقی در دو طرح متفاوت ارائه گردید. از این میان برخی از مقادیر بهدست آمده مناسب و برخی دیگر با توجه به معیارهای قابل قبول، نسبتا مناسب بودند، بنابراین برای تحقق بهترین شرایط راهکارهایی ارائه گردید.
https://jvs.isav.ir/article_243746_d7127c76164bb2c979e007ac3fd3c0b1.pdf
2021-02-19
129
143
آکوستیک معماری
شبیهسازی آکوستیک
تجزیه و تحلیل آکوستیک
سالن چندمنظوره
علی
احمدی
invtw@yahoo.com
1
مدرس موسسه عالی غیرانتقاعی لامعی گرگانی
LEAD_AUTHOR
[1] قیابکلو, ز.، "مبانی فیزیک ساختمان (آکوستیک)"، ویرایش هشتم،. انتشارات جهاد دانشگاهی، 1393.
1
[2] Krokstad, A., and S. Strøm, "Acoustical design of the multi-purpose ‘hjertnes’ hall in sandefjord", Applied Acoustics, 1979, Vol.12, no.1, pp.45-63.
2
[3] Long, Marshall, “Architectural acoustics”, Elsevier, 2005.
3
[4] احمدی, ع.، "طراحی سالن موسیقی گرگان با هدف ارتقاء ارتباط فضاهای موسیقی و معماری نور", پایان نامه کارشناسی ارشد (چاپ نشده)، 1392.
4
[5] Beranek, Leo, "The sound strength parameter G and its importance in evaluating and planning the acoustics of halls for music", The Journal of the Acoustical Society of America, 2011, Vol.129, no.5, pp.3020-3026.
5
[6] Beranek, Leo, “Concert halls and opera houses: music, acoustics, and architecture”, Springer Science & Business Media, 2012.
6
[7] Everest, F. Alton, “Master handbook of acoustics”McGraw-Hill Education, 2001.
7
[8] Ballou, Glen, “Handbook for sound engineers”, Taylor & Francis, 2013.
8
[9] گروت, ل, ن، وانگ, د، ع,عینی فر، مترجم، "روش تحقیق در معماری"، انتشارات دانشگاه تهران، 1393.
9
[10] Barron, Mike, and Sven Kissner, "A possible acoustic design approach for multi-purpose auditoria suitable for both speech and music", Applied Acoustics, 2017, Vol.115, pp.42-49.
10
[11] اورست, آ.، غ لیاقتی، مترجم،" آکوستیک در طراحی استودیوها"، مرکز تحقیقات مسکن، 1385، شماره 203.
11
[12] Veneklasen, Paul S., "Model techniques in architectural acoustics", The Journal of the Acoustical Society of America, 1970, Vol.47, no.2A, pp.419-423.
12
[13] Rindel, Jens Holger, "The use of computer modeling in room acoustics", Journal of vibroengineering, 2000, Vol.3, no.4, pp.219-224.
13
[14] Schroeder, Manfred R., "Computer models for concert hall acoustics", American Journal of Physics, 1973, Vol.41, no.4, pp.461-471.
14
[15] Huopaniemi, Jyri, Lauri Savioja, and Matti Karjalainen, "Modeling of reflections and air absorption in acoustical spaces a digital filter design approach", In Proceedings of 1997 Workshop on Applications of Signal Processing to Audio and Acoustics, pp.4-pp. IEEE, 1997.
15
[16] Berkhout, A. J., D. De Vries, J. Baan, and B. W. Van den Oetelaar, "A wave field extrapolation approach to acoustical modeling in enclosed spaces", The Journal of the Acoustical Society of America, 1999, Vol.105, no.3, pp.1725-1733.
16
[17] Drotleff, H., and X. Zhou, "Attractive room acoustic design for multi-purpose halls", Acta Acustica united with Acustica, 2001, Vol.87, no.4, pp.500-504.
17
[18] Funkhouser, Thomas, Nicolas Tsingos, Ingrid Carlbom, Gary Elko, Mohan Sondhi, and James West, "Modeling sound reflection and diffraction in architectural environments with beam tracing", In Forum Acusticum, 2002, p.8.
18
[19] Rindel, Jens Holger, "Modelling in auditorium acoustics. From ripple tank and scale models to computer simulations", Revista de Acústica, 2002, Vol.33, no.3-4, pp.31-35.
19
[20] Funkhouser, Thomas, Nicolas Tsingos, Ingrid Carlbom, Gary Elko, Mohan Sondhi, James E. West, Gopal Pingali, Patrick Min, and Addy Ngan, "A beam tracing method for interactive architectural acoustics", The Journal of the acoustical society of America, 2004, Vol.115, no.2, pp.739-756.
20
[21] Picaut, Judicaël, Vincent Valeau, Alexis Billon, and Anas Sakout, "Sound field modeling in architectural acoustics using a diffusion equation", 2006.
21
[22] Noisternig, Markus, Brian FG Katz, Samuel Siltanen, and Lauri Savioja, "Framework for real-time auralization in architectural acoustics", Acta Acustica United with Acustica, 2008, Vol.94, no.6, pp.1000-1015.
22
[23] Azad, H., Ali Qapu, “Persian Historical Music Room”, Proceedings of the Institute of Acoustics, 2008, Vol.30, no,3, pp.1-6.
23
[24] Rindel, J. H., “Room acoustic prediction modelling”, XXIII Encontro Da Sociedade Brasileira Deacústica Salvador-Ba, 2010,Vol.18, no.A21, pp.1-12.
24
[25] Webb, Craig J., and Stefan Bilbao, "Computing room acoustics with CUDA-3D FDTD schemes with boundary losses and viscosity", In 2011 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), IEEE, 2011, pp.317-320.
25
[26] قیابکلو, ز.، "طراحی آکوستیکی سالن همایش چند منظوره با الهام از صدف دریایی"، مجله هنرهای زیبا، 1392، شماره 3 قسمت 18، صفحه 17-24.
26
[27] Sakuma, T., Sakamoto, S., & Otsuru, T., “Computational simulation in architectural and environmental acoustics”, Springer, 2014.
27
[28] Vorländer, Michael, "Computer simulations in room acoustics: Concepts and uncertainties", The Journal of the Acoustical Society of America, 2013, Vol.133, no.3, pp.1203-1213.
28
[29] Pelzer, Sönke, Lukas Aspöck, Dirk Schröder, and Michael Vorländer, "Integrating real-time room acoustics simulation into a cad modeling software to enhance the architectural design process", Buildings, 2014, Vol.4, no.2, pp.113-138.
29
[30] مجیدی، هـ، فرشچی، ح و غفاری، ا، "یکپارچه سازی طراحی پارامتریک و مهندسی آکوستیک (برای شکل دادن به سالن کنسرت)" نشریه انجمن آکوستیک و ارتعاشات، دوره 7، شماره 14، 1397، ص 40-56
30
[31] گروه مؤلفین.، "مقررات ملی ساختمان (مبحث 18) آکوستیک"، نشر توسعه ایران، 1390.
31
[32] Renkus-Heinz, User’s guide and tutorial. Retrieved from http://ease.afmg.eu/Visited Date: 2018
32
[33] Ottobre, Roberto Daniel, Marcelo Ottobre, Agustín Arias, María Pérez Maraviglia, and Oscar Cañadas, "Multiplex cinema halls: Design and construction of six halls in the city of Mar del Plata", In Proceedings of Meetings on Acoustics 22ICA, vol.28, no.1, p. 015025. Acoustical Society of America, 2016.
33
[34] Hoffmeier, J. "Untersuchungen zum Einfluß von Raumklang-färbungen auf die Deutlichkeit von Sprache [Investigations on the influence of room timbres on speech definition] Thesis for a degree at the TU Dresden", Technical University of Denmark, 1996.
34
[35] Hioka, Yusuke, Kenta Niwa, Sumitaka Sakauchi, Ken'ichi Furuya, and Yoichi Haneda, "Estimating direct-to-reverberant energy ratio based on spatial correlation model segregating direct sound and reverberation", In 2010 IEEE International Conference on Acoustics, Speech and Signal Processing, pp.149-152., IEEE, 2010.
35
[36] Yang, Han-Seung, Dae-Jun Kim, and Hyun-Joong Kim, "Rice straw–wood particle composite for sound absorbing wooden construction materials", Bioresource technology,2003, Vol.86, no.2, pp.117-121.
36