@article { author = {panahi, amir and Hassanzadeh, Alireza and moulavi, ali}, title = {Modeling the effect of noise on a piezoelectric beam to energy harvesting}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {3-10}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {In this paper, a piezoelectric beam is designed to receive sound energy in a real environment. The electrical energy received from this beam can be stored in a battery or used directly by electrical circuits. The use of two simulations of copper and piezoelectric beams, including polyvinylidine fluoride, in which the length of the piezoelectric layer is shorter and located at the optimal point of the copper beam, are used in this simulation. The 100 dB speaker sound power is applied in a 1 cubic meter room considering the presence of air in the environment to the pole in the middle of the room. By making the beam 7.8 cm long, the first bending frequency of the beam reaches close to 100 Hz. By stimulating the beam at this bending frequency, the noise effect reaches its maximum value and eventually leads to the production of a voltage of about 70 mV.}, keywords = {Piezoelectric,sound energy,beam vibration,energy extraction,acoustic-electric converter}, title_fa = {مدل سازی تأثیر نوفه صدا بر روی یک تیرک پیزوالکتریک برای جمع آوری انرژی}, abstract_fa = {در این مقاله یک تیرک پیزوالکتریک برای دریافت انرژی صوتی در محیط واقعی طراحی شده است. انرژی دریافتی الکتریکی از این تیرک می‌تواند در باطری ذخیره شده یا مستقیما توسط مدارهای الکتریکی مورد استفاده قرار گیرد. از دو تیرک مسی و پیزوالکتریک شامل پلی ‌وینیلیدن فلوراید که در آن طول لایه پیزوالکتریک کوتاه‌تر است و در نقطه بهینه تیرک مسی قرار دارد، در این شبیه‌سازی استفاده شده است. توان صوت 100 دسی‌بل بلندگو[i] در یک اتاق ۱ متر مکعبی با درنظر گرفتن وجود هوا در محیط به تیرک در وسط اتاق اعمال شده است. با ساخت تیرک در طول 8/7 سانتی‌متری، فرکانس خمشی اول تیرک به نزدیکی ۱۰۰ هرتز می‌رسد با تحریک تیرک در این فرکانس خمشی اثر نوفه به حداکثر مقدار خود می‌رسد و در نهایت منجر به تولید ولتاژ حدود 70 میلی‌ولتی می‌گردد. [i]. Speaker}, keywords_fa = {پیزوالکتریک,انرژی صوت,لرزش تیرک,برداشت انرژی,مبدل آکوستیک-الکتریک}, url = {https://jvs.isav.ir/article_44974.html}, eprint = {https://jvs.isav.ir/article_44974_7824300381f5cd9496901632d1d3a8ed.pdf} } @article { author = {Moulavi, Ali and Hassanzadeh, Alireza and Panahi, Amir}, title = {Acoustic-Electric Converter with Ear-Patterned Collector}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {11-17}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {Today, due to limited access to some places or unfavorable weather conditions, power transmission from the power plant and storage in the battery is very expensive. This has led researchers to find a way to solve this problem, so the use of environmental energy such as noise, motion (or displacement), light, wind, etc. has opened a new chapter for engineers. In this paper, a piezoelectric plate is designed and simulated by modeling a human eardrum. This plate is one of the components of the acoustic-electric converter, which is able to collect the noise of crowded and busy environments and convert them into electrical energy. By recording and analyzing audio signals from two highly polluted locations in MATLAB software, the two frequencies at which the highest sound weight occurred were considered as the intensification frequency. Then, using the software of the COMSOL and the obtained data, the natural frequency of the first mode shape of the converter geometry is equal to the frequency of the amplified sound. The most optimal diameter of the piezoelectric plate was 8 cm and the energy was equal to 10.5 microwatts per second and the voltage changes were 12 volts. In order to store and use the obtained voltage, a circuit is provided for this purpose.}, keywords = {noise pollution,acoustic-electric converter,Piezoelectric,green energy}, title_fa = {مبدل آکوستیک – الکتریک با جمع‌کننده الگوبرداری شده از گوش}, abstract_fa = {امروزه به دلیل دسترسی محدود به بعضی نقاط و یا شرایط نامساعد آب و هوایی انتقال توان از نیروگاه و ذخیره‌سازی در باطری بسیار پرهزینه است. این امر باعث شده تا محققان راهی برای حل این مشکل پیدا کنند، بنابراین استفاده از انرژی محیطی[i] از جمله نوفه، حرکت (یا جابه‌جایی)، نور، باد، و غیره توانسته باب جدیدی به روی مهندسان باز کند. در این مقاله یک صفحه پیزوالکتریک با الگوبرداری از پرده گوش انسان طراحی و شبیه‌سازی شده است. این صفحه یکی از اجزا مبدل آکوستیک-الکتریک است که قادر به جمع‌آوری نوفه محیط‌های شلوغ و پر تردد و تبدیل آنها به انرژی الکتریکی است. با ضبط و تحلیل سیگنال‌های صوتی دو مکان با آلودگی بالا در نرم‌افزار متلب[ii]، دو فرکانس که بیشترین وزن صدا در آنها رخ داده بود، به عنوان فرکانس تشدید درنظر گرفته شد. سپس با استفاده از نرم‌افزار کامسول[iii] و داده‌های به‌دست آمده، فرکانس طبیعی مد اول هندسه مبدل، برابر با فرکانس تشدید صوت قرار داده شده است. قطر بهینه صفحه پیزوالکتریک 8 سانتی‌متر انتخاب شد و انرژی معادل با 5/10 میکرووات بر ثانیه و تغییرات ولتاژی برابر 12 ولت به‌دست آمد. جهت ذخیره‌ و استفاده از ولتاژ به‌دست آمده، مداری به همین منظور ارائه شده است. [i]. Energy Harvesting [ii]. MATLAB [iii]. COMSOL}, keywords_fa = {آلودگی صوتی,مبدل آکوستیک - الکتریک,پیزوالکتریک,انرژی سبز}, url = {https://jvs.isav.ir/article_44975.html}, eprint = {https://jvs.isav.ir/article_44975_80156e0bc30c9310f31027e50862c7de.pdf} } @article { author = {davoudabadi farahani, mohammad and Asgharian Jeddi, Ali Asghar and Jamshidi Avanaki, mostafa}, title = {Sound Absorption of Warp Knitted Spacer Fabric based on the thickness}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {18-26}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {Along with the expansion of industries and the creation of unwanted sounds, acoustic phenomena and sound control has been the subject of many researches and so far different materials have been used to control it. In this work, samples of polyester yarns were produced by Rachel knitting machine equipped with two needle bars and six guide bars. The two sides of the all samples were similar with a texture of a simple knit on one side and a perforated knit structure on the other side. thickness of samples between the two sides due to various knit structures of samples was considered as the main difference between the samples. Acoustic absorption coefficient of the samples was measured by using impedance tube method in different frequencies by arranging the samples in one and three layers. It was found that the sound absorption coefficient of samples increases by increasing the thickness of samples}, keywords = {connecting yarns angle","fabric thickness","layer quantity}, title_fa = {جذب صوت پارچه های دو جداره حلقوی تاری بر اساس ضخامت}, abstract_fa = {همراه با گسترش صنایع و ایجاد صداهای ناخواسته پدیده آکوستیک و کنترل صوت مورد توجه محققان زیادی قرار گرفته است و تاکنون مواد گوناگونی برای کنترل صوت استفاده شده است. سازه‌های الیافی، در کنار برخورداری از میزان تخلخل مناسب و قابل کنترل، نسبتا ارزان و سبک نیز هستند که استفاده از آنها را بیش از سایر مواد می‌توان توجیه نمود. در این میان پارچه‌های حلقوی تاری به دلیل آویزش و فرم‌گیری راحت‌تر به عنوان جاذب صدا حائز اهمیت است. در این پژوهش پارچه دو جداره حلقوی تاری که از دو لایه جدا از هم که توسط نخ­های اتصال، به هم متصل شده­اند بر روی ماشین راشل دومیله سوزن تولید شد. دوجداره کلیه نمونه­ها یکسان بوده و با تغییر در ساختمان بافت زاویه نخ­های اتصال کاهش می­یابد. اثرات افزایش ضخامت بین دو جداره با ساختمان بافت متفاوت بر خواص آکوستیکی پارچه­های دوجداره حلقوی تاری مورد بررسی قرار گرفت. ضریب جذب صوت نمونه­ها از روش لوله امپدانس در فرکانس­های مختلف بر روی نمونه­های تک لایه و سه لایه مورد مطالعه قرار گرفت. نتایج نشان داد ضریب جذب صوت با افزایش ضخامت پارچه در نمونه‌های تک لایه و سه لایه، افزایش یافت. به‌علاوه با افزایش تعداد لایه، ضریب جذب صوت نسبت به نمونه‌های تک لایه افزایش یافت.}, keywords_fa = {پارچه دوجداره حلقوی تاری,ضریب جذب صوت,ضخامت,زاویه نخ اتصال,تعداد لایه}, url = {https://jvs.isav.ir/article_44976.html}, eprint = {https://jvs.isav.ir/article_44976_0c1e6759b6301dc3f0a0d3c88684f874.pdf} } @article { author = {Loghman, Ehsan and Kamali, Ali and Bakhtiari-Nejad, Firooz and Abbaszadeh, Mostafa}, title = {Analysis of free and forced vibrations of a viscoelastic micro-beam, using Kelvin-Voigt fractional viscoelastic model}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {27-38}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {In recent years, with the growing of fractional calculus, applications of fractional calculus in engineering sciences have been emerged. One of the applications that attracted many researchers in recent years is modelling of viscoelastic materials by using the fractional calculus. In this paper, an Euler-Bernoulli micro beam that has been modeled by fractional Kelvin-Voigt, is investigated. The beam is modeled based on linear strains, Modified Couple Stress theory (MCST) and Kelvin-Voigt fractional viscoelastic model. By the using of Hamilton principle partial fractional differential equations are derived. Equations of motions are solved by the using of Finite Element Method and Finite Difference Method. Time domain is discretized based on Finite Difference Method and space domain is discretized by utilizing the Finite Element Method. Simulations show that, fractional derivative has large effect on amplitude and response of free and forced vibration of beam and can increase or decrease the damping of the beam. Moreover, effects of beam length and viscoelastic parameter have been shown. Results of this paper can be used for improving viscoelastic model of materials.}, keywords = {Fractional calculus,micro beam,Fractional viscoelastic model,Finite difference method}, title_fa = {تحلیل ارتعاشات آزاد و اجباری در یک تیر ویسکوالاستیک میکرو، مدل شده با استفاده از مدل ویسکوالاستیک مرتبه کسری کلوین- وویت}, abstract_fa = {در سال­های اخیر با رشد حسابان کسری به تدریج کاربردهای ریاضیات مرتبه کسری در علوم مهندسی در حال پیدایش هستند. یکی از کاربردهایی که در سال­های اخیر توجه محققان را به خود جلب کرده است مدل­سازی مواد ویسکوالاستیک با استفاده از حسابان کسری است. در این پژوهش یک تیر میکرو که با استفاده از مدل ویسکوالاستیک کسری کلوین- وویت[i] مدل­سازی شده، بررسی می­گردد. تیر مورد نظر در این پژوهش با درنظر گرفتن کرنش­های خطی، تئوری تنش کوپل اصلاح شده (MCST[ii])، مدل ویسکوالاستیک مرتبه کسری کلوین- وویت مدل­­سازی می­شود و با استفاده از اصل هامیلتون[iii]، معادله حرکت به صورت یک معادله­ مرتبه کسری با مشتقات جزئی حاصل می­شود. معادله به‌دست آمده با استفاده از ترکیب المان محدود و تفاضل محدود حل می­­شود. معادلات در حوزه زمان با استفاده از تفاضل محدود و در حوزه مکان با استفاده از المان محدود و گالرکین گسسته‌سازی می­شوند. شبیه­سازی­های انجام شده نشان می­دهد که مشتق مرتبه کسری تأثیر فراوانی در دامنه و پاسخ ارتعاشات آزاد و اجباری تیر مورد نظر دارد و باعث افزایش یا کاهش میرایی می­شود. علاوه‌بر این اثرات طول تیر و ضریب میرایی ویسکوالاستیک نیز بررسی شده­اند. نتایج نشان می‌د­هند پدیده تشدید اثرات مشتق مرتبه کسری را نیز به شدت تحت تأثیر قرار می­دهند. نتایچ این مقاله می­تواند برای بهبود مدل­سازی مواد ویسکوالاستیک به‌کار گرفته شود. [i]. Kelvin Voigt fractional viscoelastic model [ii]. Modified Couple Stress Theory [iii]. Hamilton’s principle}, keywords_fa = {حسابان کسری,تیر میکرو,مدل ویسکوالاستیک مرتبه کسری,روش تفاضل محدود}, url = {https://jvs.isav.ir/article_44977.html}, eprint = {https://jvs.isav.ir/article_44977_d5e27f7e790c12469b5092346c24aae2.pdf} } @article { author = {Rostami, Hamidreza and Pirouzram, Vahdat and Bakhtiari-Nejad, Firooz and Orooji, Javad}, title = {A numerical study of ship motions effects on the static and vibration characteristics of the tower}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {39-54}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {The static and vibration studies of a tower of a surface float is investigated in this paper. Designing a ship's telecommunication tower is one of the most important issues in designing the ship from the structural point of view to install the required types of antennas and radars. Therefore, in the analysis, the telecommunication tower and the deck of the ship are modeled. After examining the static state and calculating deformations and stresses, according to the ship's movements, the resulting forces are added to the analysis and the effects on the stresses and displacements are obtained. It should be noted that in this analysis, accelerations as gravitational force, rotational accelerations as rotational volume forces, and also radar weight as a concentrated force are applied to the structure. Next, frequency analysis is performed and different structural modes are extracted. The results show that in the design process, in addition to considering the parameters of tower design (such as boundary conditions, operating load, places of members), their location of using should also be considered. The use of towers on the deck of the vessels significantly reduced the safety factor. Also, it can be observed various phenomena such as fatigue in the limbs, especially the connection place to the deck, which can have very destructive effects in the long run and reduce the life of the structure. Therefore, in designing the towers of floating structures, more safety factors should be considered and special attention should be paid to the movements of the vessel.}, keywords = {Tower,Telecommunication tower,Ship motions,Static analysis,Vibration Analysis}, title_fa = {مطالعه عددی اثرات حرکات کشتی بر روی مشخصه‌های استاتیکی و ارتعاشی دکل}, abstract_fa = {مطالعه استاتیکی به همراه ارتعاشی دکل یک شناور سطحی در این مقاله مورد بررسی قرار گرفته است. طراحی دکل مخابراتی یک کشتی از نقطه نظر سازه­ای جهت نصب انواع آنتن­ها و رادارهای مورد نیاز، از مهم­ترین موضوعات در طراحی یک کشتی به حساب می­آید. ازهمین‌رو، در تحلیل انجام شده دکل مخابراتی به همراه عرشه کشتی مدل شده است. بعد از بررسی دکل و عرشه در حالت استاتیک و محاسبه تغییر شکل­ها و تنش­ها، با توجه به حرکات کشتی در دریا، نیروهای ناشی از آن به تحلیل اضافه شده و اثرات حاصل شده بر روی تنش­ها و جابه‌جایی­های دکل برآورد شده است. لازم به ذکر است که در این تحلیل شتاب­های خطی به صورت نیروی گرانش، شتاب­های دورانی به صورت نیروی حجمی دورانی به سازه دکل و وزن رادار به صورت نیروی متمرکز بر آن اعمال گشته­اند. پس از آن، تحلیل فرکانسی انجام و مودهای مختلف نوسان سازه دکل استخراج گردیده است. نتایج نشان می­دهد که در طراحی دکل­ها، علاوه‌بر درنظر گرفتن پارامترهای طراحی خود دکل (نظیر شرایط مرزی، بار اعمالی، نحوه قرارگیری اعضا)، مکان مورد استفاده آنها نیز باید مورد توجه قرار گیرد. استفاده از دکل­ها در عرشه شناورها موجب شد که فاکتور ایمنی به طرز چشمگیری کاهش یابد. همچنین، شاهد پدیده­های مختلفی همچون خستگی در اعضا به ویژه محل اتصال به عرشه باشیم که می­تواند در دراز مدت آثار بسیار مخربی داشته باشد و باعث کاهش طول عمر سازه گردد. بنابراین، در طراحی دکل­های سازه­های شناور دریایی، باید فاکتورهای ایمنی بیشتری منظور و به‌طور ویژه­ای به حرکات جانبی شناور اهمیت داده شود.}, keywords_fa = {دکل,دکل مخابراتی,حرکات کشتی,تحلیل استاتیکی,تحلیل ارتعاشی}, url = {https://jvs.isav.ir/article_44978.html}, eprint = {https://jvs.isav.ir/article_44978_8effa78058290760086ab2b77d457ccf.pdf} } @article { author = {رهی, عباس}, title = {Investigating the lateral vibration of the drill in the concrete drilling process}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {55-68}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {Drills have many applications in industry. One of the applications of drills is in the process of converting which can be modeled as a rotor-disk overhung system. In this paper, the lateral vibration of a concrete drill is studied. For this purpose, first, the governing equations the lateral vibration of the system and its boundary conditions are derived using the Hamilton principle. The governing equations are then solved using the Assumed mode method and the first two natural frequencies of the lateral vibration of the system are calculated by the analytical method. In the following, the effect of changing the main parameters of the system, such as the rotational speed of the drill, the diameter of the drill, and the axial force on the natural frequencies is studied and the results are presented in the form of graphs. The results show that the main parameters of the system, such as axial force and rotational speed, have a significant effect on the value of the system's natural frequencies. The results can be used by design engineers to optimize such systems.}, keywords = {Drill,Concrete drilling,Overhung rotor,Lateral vibrations,natural frequency}, title_fa = {بررسی ارتعاش جانبی مته در فرآیند سوراخکاری بتن}, abstract_fa = {مته‌ها در صنایع کاربردهای متعددی دارند. یکی از کاربردهای آنها در فرایند سوراخ‌کاری بتن (کرگیری یا مغزه‌گیری[i]) است که می‌توان آن را به صورت یک سیستم روتور سرآویز[ii] روتور-دیسک مدل‌سازی کرد. در این مقاله ارتعاش جانبی یک مته سوراخ‌کاری بتن، که به صورت یک سیستم سرآویز روتور-دیسک تحت تأثیر نیروی محوری مدل‌سازی شده است، مورد بررسی قرار می‌گیرد. برای این منظور ابتدا معادلات حاکم بر ارتعاش جانبی سیستم و شرایط مرزی آن با استفاده از اصل همیلتون استخراج می‌شود. سپس معادلات حاکم با استفاده از روش مودهای فرضی حل شده و دو فرکانس طبیعی اول ارتعاش جانبی سیستم به روش تحلیلی محاسبه می‌شوند. در ادامه اثر تغییر پارامترهای اصلی سیستم همانند سرعت دورانی مته، قطر مته و مقدار نیروی محوری، بر مقدار فرکانس‌های طبیعی مورد مطالعه قرار می‌گیرد و نتایج به صورت نمودارهایی ارائه می‌شوند. نتایج حاصل نشان می‌دهد پارامترهای اصلی سیستم همانند طول مته، قطر مته، نیروی محوری و سرعت دورانی تأثیر قابل توجهی روی مقدار فرکانس طبیعی سیستم دارد. با توجه به اینکه فرکانس طبیعی سیستم به صورت نیمه تحلیلی استخراج شده است، نتایج می‌تواند مورد استفاده مهندسان طراح، برای بهینه‌سازی اینگونه سیستم‌ها قرار گیرد. [i]. Concrete core drilling [ii]. Overhung}, keywords_fa = {مته,سوراخکاری بتن,روتور سرآویز,ارتعاشات جانبی,فرکانس طبیعی}, url = {https://jvs.isav.ir/article_44979.html}, eprint = {https://jvs.isav.ir/article_44979_4a122f9e595dce6c64bad17c38f41f42.pdf} } @article { author = {Hosseini-Ara, Reza and Hadi, Mohsen}, title = {Design and analysis of a resonant nano-bio-sensor based on carbon nanotubes to detect viruses}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {69-80}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {In this study, a theoretical model based on the modified nonlocal Euler-Bernoulli is presented for the detection of biologically adsorbed particles on doubly clamped carbon nanotubes as resonant nano-bio-sensors. The basis of the work of these resonant nano-bio-sensors is the accurate calculation of the change in the resonant frequency because of the change in the mass due to the surface adsorption of the viruses. In most studies, simply supported ends have been used for simplicity of calculations, while it is almost impossible to build such supports at nano-scale. For this purpose, a doubly clamped ends was used to analyze this problem and for the first time, the closed-form vibration frequency response of a doubly clamped nano-sensor was presented according to the geometric and mechanical characteristics of the nanotubes along with nonlocal, surface and rotary inertia effects. Although many researchers have ignored the effects of surface stress and rotary inertia on the vibration analysis of nano-sensors, this study found that these effects at nano-scale played a major role in changing the frequency and accuracy of resonant nano-bio-sensors. Also, based on the obtained results, six different types of viruses were examined. Based on the sensitivity analysis, the designed nano-bio-sensor was able to separate the frequency change and identify them, consequently.}, keywords = {Carbon nanotubes,Resonant nano-bio-sensor,Nonlocal Effect,surface stresses,Rotary Inertia}, title_fa = {طراحی و تحلیل یک نانو زیست حسگر ارتعاشی بر پایه نانولوله‌ کربنی برای تشخیص ویروس‌ها}, abstract_fa = {در این پژوهش، یک مدل نظری بر اساس معادلات تیر اویلر-برنولی[i] اصلاح شده‌ی ناموضعی برای تشخیص ذرات بیولوژیکی جذب شده بر روی نانولوله‌های کربنی دو سر گیردار به عنوان یک نانو زیست حسگر ارتعاشی ارائه شده است. اساس کار این نانو زیست حسگرهای ارتعاشی، محاسبه دقیق تغییر فرکانس تشدید به دلیل تغییر جرم ناشی از جذب سطحی ویروس‌ها است. در بیشتر تحقیق‌های انجام شده برای سادگی محاسبات از تکیه‌گاه‌های دوسر مفصلی استفاده کرده‌اند، درحالی‌که ساخت چنین تکیه‌گاه‌هایی در مقیاس نانو تقریبا غیرممکن است. به این منظور از تکیه‌گاه‌ دو سر گیردار برای تحلیل این مسأله استفاده شده است و برای نخستین بار، پاسخ بسته فرکانس ارتعاشی یک نانوحسگر دوسر گیردار بر حسب مشخصات هندسی و مکانیکی نانولوله به همراه اثرهای ناموضعی، سطحی و اینرسی دورانی، ارائه گردید. اگرچه بسیاری از محققان از اثرهای تنش سطحی و اینرسی چرخشی به‌طور هم‌زمان در تحلیل ناموضعی ارتعاشی نانوحسگر چشم‌پوشی کرده‌اند، اما این پژوهش نشان می‌دهد که اثرهای مذکور در مقیاس‌ نانو، نقش زیادی در تغییر فرکانس تشدید و دقت نانو زیست حسگرهای ارتعاشی داشته‌اند. همچنین بر پایه پاسخ به‌دست آمده، شش نوع ویروس متفاوت مورد بررسی قرار گرفت که براساس آنالیز حساسیت، نانو زیست حسگر طراحی شده موفق به تفکیک تغییر فرکانس و در نتیجه تشخیص آنها شد. [i]. Euler-Bernoulli beam}, keywords_fa = {نانولوله‌های کربنی,نانو زیست حسگر ارتعاشی,اثر ناموضعی,تنش‌های سطحی,اینرسی چرخشی}, url = {https://jvs.isav.ir/article_44980.html}, eprint = {https://jvs.isav.ir/article_44980_2348646ad836df497d6ff6d200242534.pdf} } @article { author = {Saneinejad, Vandad and Gourani, Pouya and Barati Sedeh, Amirhossein and Rezaei, Fatemeh}, title = {Study of vibration frequency of bridge structure with the help of Doppler laser vibration meter}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {81-90}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {In this paper, the vibrational frequency of the bridge construction structure has been studied by both experimental and simulation forms using the laser doppler vibrometer. The calculations are performed using simulation of MATLAB simulink and using of interference set-up to divide the laser beam into two reference and measurement arms. The time and frequency behavior of the received signals is calculated for vibration of the bridge structure by considering all of noises including optical noise, electrical circuit noise and test environment. Also in this paper, studies are performed during the construction of a laser Doppler vibrometer and by an interferometric set-up. The used set-up in this experiment is the same as the homodyne arrangement of the Michelson interferometer. It should be noted that in this arrangement, a differential circuit has been used to reduce noise in the electronic part of the device.Moreover, by properly processing the signals and removing all optical, electrical, and environmental noise, the frequency of the vibrating target has been investigated with high accuracy. The results of this study indicate an acceptable consistency between the results of simulation and experimental studies, which indicates the high accuracy of the device in measurements.}, keywords = {bridge structure,doppler effect,laser vibrometer,Noise}, title_fa = {مطالعه فرکانس ارتعاش سازه پل به کمک دستگاه ارتعاش-سنج لیزری دوپلری}, abstract_fa = {در این مقاله، فرکانس ارتعاش سازه عمرانی پل به دو صورت تجربی و شبیه­سازی با استفاده از مکانیزم ارتعاش­سنج لیزری مبتنی بر اثر دوپلری (LDV[i]) مورد مطالعه قرار گرفته است. محاسبات با استفاده از شبیه­سازی سیمیولینک[ii] نرم­افزار متلب[iii] و با بهره­گیری از چیدمان تداخل­سنجی جهت تجزیه پرتوی لیزر به دو بازوی مرجع و اندازه­گیری انجام شده است. رفتار زمانی و فرکانسی سیگنال­های دریافتی برای ارتعاش سازه پل با درنظر گرفتن تمام نوفه­ها اعم از نوفه­های اپتیکی، نوفه­های مدارات الکتریکی و محیط آزمایش محاسبه شده است. همچنین در این مقاله، به منظور ساخت دستگاه ارتعاش­سنج لیزری مبتنی بر اثر دوپلر، از چیدمان اپتیکی تداخل­سنجی استفاده شده است. چیدمان مورد استفاده در این آزمایش از نوع چیدمان هموداین تداخل­سنج مایکلسون[iv] است. لازم به ذکر است که در این چیدمان از مدار تفاضلی جهت کاهش نوفه­ها در بخش الکترونیک دستگاه استفاده شده است. همچنین، با پردازش مناسب سیگنال­ها و حذف کلیه نوفه­های اپتیکی، الکتریکی و محیطی، فرکانس جسم مرتعش با دقت بالا بررسی شده است. نتایج حاصل از این تحقیق نشان دهنده هم‌خوانی قابل قبولی بین نتایج حاصل از مطالعات شبیه­سازی و تجربی است که این موضوع نشان‌دهنده دقت بالای دستگاه در اندازه‌گیری­ها است. [i]. Laser Doppler Vibrometry [ii]. Simulink [iii]. MATLAB [iv]. Homodyne Michelson Interferometer}, keywords_fa = {سازه پل,اثر دوپلر,ارتعاش‌سنج لیزری,نوفه}, url = {https://jvs.isav.ir/article_45664.html}, eprint = {https://jvs.isav.ir/article_45664_78019dc52ed5076cbef4e8d56bb3b328.pdf} } @article { author = {Nabovvati Fumani, Seyed Arash and Mozaffar, Farhang and Mortezaei, Seyed Reza}, title = {Effectiveness of speech intelligibility from length and width changes of classrooms with similar volume}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {91-102}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {The interaction between student and teacher and consequently the educational performance in the classroom is significantly influenced by the student's understanding of the teacher's speech. Given the impact of the speech transmission index(STI) on the physical conditions of space along with human factors, it can be expected that creating favorable environmental conditions in these spaces to create appropriate acoustic conditions will improve quantitative measures related to speech Intelligibility and thus improve the performance of the spaces.In previous studies, researchers often focused on background noise level as an external factor or the use of soundproofing materials in walls or interior surfaces and the effect of changes in the length and width of spaces in the same volume that have equal computational reverberation time have been Less paid. Therefore, the effectiveness of speech intelligibility of listeners with the same conditions and position relative to the sound source in spaces with different lengths and widths but with the same area and volume, is the purpose of this article.Here, an attempt has been made with a descriptive-analytical approach through simulation with ODEON software to produce the necessary data for statistical tests and especially correlation test in order to investigate the effectiveness of STI values in fixed receiver points in spaces of different lengths and widths.According to the findings of the statistical tests, increasing the length as well as increasing the distance between the receiver and the lateral surfaces, in spaces with the same area and volume, reduced the values of the STI.}, keywords = {Speech transmission index,classroom,spatial dimension,sound simulation,Odeon}, title_fa = {اثر پذیری وضوح گفتار از تغییرات طول و عرض کلاس های درس با حجم فضایی مشابه}, abstract_fa = {تعامل میان دانش‌آموز و معلم و به تبع آن عملکرد آموزشی در کلاس درس به میزان قابل توجهی تحت تأثیر وضوح گفتار معلم توسط دانش‌آموز است. با توجه به تأثیرپذیری شاخص تراگسیل گفتار[i] از شرایط کالبدی فضا در کنار عوامل انسانی، می‌توان انتظار داشت که ایجاد شرایط محیطی مطلوب در این فضاها به منظور ایجاد شرایط آکوستیکی مناسب، موجب بهبود سنجه‌های کمّی مرتبط با وضوح گفتار و در نتیجه ارتقا عملکرد فضاهای آموزشی گردد. در مطالعات پیشین اغلب توجه محققین معطوف به تراز نوفه زمینه به عنوان یک عامل بیرونی و یا کاربرد مواد عایق و جاذب صوت در دیوارها و یا سطوح داخلی بوده و به تأثیر تغییرات طول و عرض فضاها در شرایط حجمی یکسان که دارای زمان واخنش[ii] برابر  از نظر محاسباتی هستند، کمتر پرداخته شده است. بنابراین، اثرپذیری وضوح گفتار شنوندگان، با شرایط و موقعیت قرارگیری یکسان نسبت به منبع صدا در فضاهایی با طول و عرض متفاوت ولی با مساحت و حجم یکسان، هدف این مقاله است. در تحقیق حاضر تلاش گردیده با رویکردی توصیفی-تحلیلی از طریق شبیه‌سازی با نرم‌افزار ادئون[iii] جهت تولید داده لازم برای آزمون‌های آماری و به ویژه آزمون همبستگی به منظور بررسی اثرپذیری مقادیر شاخص تراگسیل گفتار نقاط گیرنده ثابت در فضاهایی با طول و عرض مختلف پرداخته شود. طبق یافته‌های حاصل از آزمون‌های آماری مشخص گردید که افزایش طول و همچنین افزایش فاصله بین محل گیرنده و سطوح جانبی، در فضاهای با مساحت و حجم یکسان موجب کاهش مقادیر شاخص تراگسیل گفتار شدند. [i]. Speech Transmission Index(STI) [ii]. Reverberation [iii]. ODEON}, keywords_fa = {شاخص تراگسیل گفتار,کلاس درس,ابعاد فضایی,شبیه‌سازی صوتی,ادئون}, url = {https://jvs.isav.ir/article_45694.html}, eprint = {https://jvs.isav.ir/article_45694_be986f2167de2a9b747fcef674db169f.pdf} } @article { author = {Jamdar, Mahshad and Meshkat-Dini, Afshin and Ghanbari, Ali}, title = {A parametric closed-form model for simulation of intensive ground motions caused by near-fault strong earthquake records}, journal = {Journal of Vibration and Sound}, volume = {9}, number = {17}, pages = {103-117}, year = {2020}, publisher = {Iranian Society of Acoustics and Vibration}, issn = {2383-1839}, eissn = {2345-623X}, doi = {}, abstract = {Strong ground motions which recorded near an active fault, have specific physical characteristics. Moreover, the time history of strong a near-fault record evidently contains a large distinct pulse as well as high amplitude spikes in the form acceleration, velocity and displacement wave-like features. The strong near-fault ground motions have potential to release a great deal of energy and create powerful impact motion along with large period pulses in the velocity time history. In order to have a comprehensive understanding and conceptualization on the nature of strong near-fault ground motions caused by high-energy earthquakes, it is possible to develop analytical closed-form pulses and artificial wavelike motions to develop the computational viewpoints related to seismic response of structures. In this study, the simulation and modeling of pulses displayed in the velocity time history of near-fault earthquake records are considered and evaluated analytically. The developed mathematical formulation has been completed based on the application of several compound trigonometric statements. It should be noted that the prepared mathematical formulation has the ability to fit the geometric shape and physical nature of velocity and acceleration pulses. The computational process of the proposed closed-shape formulation has been accomplished in such a way, not only to fit the distinct pulses in both of acceleration and velocity time histories, but also to be applicable in dynamic response analyses. In this regard, the range of kinetic energy flux variations obtained corresponding to both of the recorded ground motions and the fitted artificial motion model, have been calculated and compared.}, keywords = {Near-Fault Earthquake,Time history,Pulse Type Motion,Closed-Form Model,Kinetic energy}, title_fa = {برازش و تعیین پارامترهای مدل فرم بسته برای جنبش شدید زمین تحت رکوردهای نیرومند زلزله در حوزه نزدیک گسل}, abstract_fa = {جنبش­های نیرومند زمین در حوزه نزدیک گسل دارای مشخصات خاصی بوده و تاریخچه زمانی این فرایندها می­تواند دارای پالس­های بزرگ با پریود بلند سرعت و نیز موجک­های تغییر مکان ­پایه با هر دو ماهیت استاتیکی و دینامیکی باشد. رکوردهای نیرومند ناشی از لرزش­ها و ارتعاشات شدید زمین در حوزه نزدیک گسل­های فعال، دارای قابلیت بالای آزادسازی انرژی و ایجاد جنبش­های نیرومند ضربه­ای و نیز توانایی شگرف در آشکارسازی پالس­های بزرگ در تاریخچه زمانی هستند. بر این پایه، در جهت شناخت و مفهوم­‌سازی جامع­تر جنبش­های نیرومند زمین در حوزه نزدیک گسل، می­توان مدل­های برازشی فرم بسته را با توجه به مشخصات ساختارهای موج­گونه در تاریخچه زمانی، رابطه­سازی نمود. در این مطالعه با تفسیر و کاربرد دو عبارت ترکیبی مثلثاتی، به موضوع مدل‌سازی ساختارهای موجی شکل موجود در تاریخچه زمانی رکوردهای حوزه نزدیک پرداخته شده است. عبارات مذکور، دارای قابلیت برازش شکل و ساختار پالس­های سرعت و شتاب هستند. همچنین، روند شبیه­سازی­های فرم بسته به گونه­ای انجام شده که علاوه‌بر برازش پالس­های موجود در رکورد شتاب و تاریخچه زمانی سرعت زمین، ساختارهای حاصله نیز دارای شباهت هر چه بیشتر با رکورد واقعی باشد. در همین راستا، پس از مدل­سازی پالس­های مذکور، دامنه تغییرات انرژی جنبشی حمل شده توسط رکورد واقعی و نیز نگاشت مصنوعی، محاسبه و با هم مقایسه شده‌اند. نتایج این تحقیق، نشان­گر قابلیت­های خوب و مؤثر کاربردی برای مدل برازشی فرم بسته است.}, keywords_fa = {زلزله حوزه نزدیک,تاریخچه زمانی,جنبش پالس‌گونه,مدل فرم بسته,انرژی جنبشی}, url = {https://jvs.isav.ir/article_45695.html}, eprint = {https://jvs.isav.ir/article_45695_a031a9ea89a721e7cb02682e5cb5ce83.pdf} }